For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Occasional Contributor
Posts: 14
Registered: ‎08-21-2013

Urgent help - configdownload issue

I am getting below message while performing config download.


Appl     Primary/Secondary Versions
FOS      v7.4.1a


Switch is disabled now. A production issue can someone help please


configdownload -sftp IP address ,admin,/tracedump/SW1/config280220160451.txt,password

                         *** CAUTION ***

  This command is used to download a backed-up configuration
  for a specific switch.  If using a file  from a  different
  switch, this file's configuration  settings will  override
  any current switch settings.   Downloading a configuration
  file, which was uploaded  from a different type of switch,
  may cause this switch to fail.

  A switch reboot is required for the changes to take effect.

  configDownload operation may take several minutes
  to complete for large files.
  Do you want to continue [y/n]: y
admin@xx.xx.x.xx's password:

Doing configDownload on switch ...

Activating configDownload: Switch is disabled
configDownload: Edge Hold Time (0) is out of range (80..500)

configDownload not permitted

Valued Contributor
Posts: 559
Registered: ‎03-20-2011

Re: Urgent help - configdownload issue

Did you already check the EHT value in the config file that you are trying to download?

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.