07-07-2010 04:17 PM
I''m to try to enable SSL web access to our switches and having some issue with certificates
I'm using a self-signed certificate, when I import the certificate it shows sucessful. But I cannot connect to the switch via SSL.
I'm tried to connect to the switch on port 443 but I don't get a response so I don't believe the SSL Service is running. I've checked Ipfilter and can see that 443 traffic is permitted.
After this I have few questions
Is there a way to enable logging to I can see if my certificate is installed correctly and working?
Can i add a certificate and enable SSL via the web interface?
Thanks in advance.
07-08-2010 04:36 PM
No, I used 'seccertutil' command as per the userguide. I can export and import the certificate, but this only works when you import using the .pem extension.
Once that is completed, I try to acess the system via https:// and the page fails.
I've done a port scan on the switch, and port 443 isn't open.
It appears the userguide is missing some steps
07-08-2010 05:19 PM
Assuming you created the signed certificate correctly, when you imported the .crt file back into SAN switch did you execute the following command
seccertutil import -config swcert -enable https
This will enable https on the switch