For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 43
Registered: ‎08-31-2009

This is the configuration

This is the configuration

brocade2:admin> fabricshow
Switch ID   Worldwide Name           Enet IP Addr    FC IP Addr      Name
98: fffc62 10:00:00:05:1e:04:df:1d        >"brocade2" --> 200e (SWITCH TYPE 34) version 5.2.0b
101: fffc65 10:00:00:c0:dd:0d:11:c4         "FCSM4Gb237" --> QLOGIC 4GB fIBER CHannel Switch module for IBM Blade center - version
103: fffc67 10:00:00:05:1e:bf:e0:93         "EMC_FCSW4" --> Switch Type 71.2 version v6.1.0j

The Fabric has 3 switches

When creating a zone we get the following errors (from "Events"):

Message ID:

Zoning transaction initiated by user: admin, Role: admin could not be completet successfully - Zoning transaction aborted - Bad transaction

Message ID:

Zoning transaction aborted - Bad Zone Config. .

Posts: 0

Re: This is the configuration

The Zoning Transaction was aborted due to a variety of potential errors: zone merge, zone config
change, bad zone configuration, or other errors. The specific reason is displayed in the error message.

In your case try through telnet. could you pls let me knwo which are the commands you have fired. what is the output of cfgshow.

External Moderator
Posts: 5,620
Registered: ‎02-23-2004

Re: This is the configuration

--->>> CHannel Switch module for IBM Blade center - version

QLogic Blade Switches / McDATA Blade Swicthes, are not longer supported and cannot Operate whit FOS 6.x

If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.


Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.