02-16-2011 08:11 AM
When using sanloader for firmware update the switch fails to connect to the server. The server has 2 IP adresses, one on the switches management lan, and one on the normal lan. Sanloader send the wrong IP to the switch in the firmwaredownload command. How to fix this?
Checking system settings for firmwaredownload...
Server IP: 192.168.5.78, Protocol IPv4
Firmware access timeout.
The server is inaccessible or firmware path is invalid. Please make sure the server name or IP address, the user/password and the firmware path are valid.
Correct server IP for switch: 192.168.7.78
02-16-2011 09:22 AM
Then don't use SANloader, if I'm right it's an HP internal tool.
If you must, try changing the order of adapters under start >> config. >> network >> advanced (in menu bar) >> advanced settings .