04-04-2013 08:56 AM
I need a ports info list preferably in XLS or TXT or CSV format, can you send me me or point me for a full size 8 blade x 48 port DCX.
for each port (I m sure some more info won't hurt, but I mostly need these).
Thanks in advance !
04-05-2013 01:30 AM
I look at your sheet and I fail to see the info.
Just to be clear
for example User Port 319 (blade 4, port 47 - fourth blade top right port) and the Port ID is 0x0DB780 (0xD being the Domain ID) and according to your sheet the number is 191 and it does not fit with the other numbers.
The reason that I am asking for that Port ID (SCSI ID) listing is I am trying to allocate some blades as tape blades and as I know (may be I am wrong) tapes being scanned in the same zone have been discovered in the line from the lowest Port ID first to the higher Port IDs, is it true ?
04-08-2013 01:04 AM
That was the information I was looking for. Thanks a lot Bill !
Now for the question. If 2 different tape ports are in the same zone, which one is discovered first when ports are rescanned on the host side, the one with lower Index or lower Port ID ?
07-15-2013 11:13 AM
Is this sheet similar for DCX8510-4 (small director) ?
Yes, this is the same blade.
And I couldn't find this -> slot 1 the lowest slot ?
Yes, slot 1 is the lowest slot