Ldap miss configured brocade 6520 SAN Switch now not able to login [ Edited ]

[tejpatti]

I recently configured ldap on a switch to test it out.
I misconfigured the AD portion and no I cannot log into the switch.  No local users from the switch database are working.  How do you recover from this misconfiguration?
Any advice would help

[Antonio Bongiorno T…]

@tejpatti

https://community.brocade.com/t5/Fibre-Channel-SAN-Forums/Can-I-connect-via-serial-port-if-RADIUS-only-is-configured/m-p/91388#M25547

[tejpatti]

Thanks for looking into it.

The switch in production now, if connect through serial port will it erase the configuration on the SAN switch..?

I just want to remove the ldap configuration from the SAN Switch. I have all the local user passwords with me.

Can you pls help me procedure.

Current FOS is 8.0.2c

I have given authentication type as “ldap;local”

Even though i have given local I’m unable to login with local user, I have option to shutdown the Ldap server.

[Antonio Bongiorno T… · Accepted solution]

@tejpatti

--->>>The switch in production now, if connect through serial port will it erase the configuration on the SAN switch..?

No, from a point of view Zone Alias, and other config nothing will erase.

You need simple to follow the mentioned procedure, connect trough a serial port, and then re-configure as local or remove any  LDAP config with AAA command.

[tejpatti]

Thanks you, first i have set the authetication type as "local" first.. then im able to remove the ldap configuration.