For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

Isl'ing brocade to McData Switches

I am attempting to ISL a Brocade 2800 to a Mcdata Switch and wondering if somebody can give me the Do’s and Don’ts. The errors that I have encountered include the following:

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

Make sure your 2800 is in interoperability mode...

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

Do you have procedures to put switch into interoperability mode?

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

I believe that you just have to plug it into another vendors switch and it should automatically go into interop mode. I attached a Brocade Whitepaper on interoperability for you. It's old, but maybe it'll help.I'll ask around for any procedures.

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

To put the Brocade switch in interop mode you should do the following:You're done.

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

You must also put de McData switch into interop mode.HTH

Anonymous
Posts: 0

Re: Isl'ing brocade to McData Switches

I found that when I used McData Fabric mode I was able to use the Brocade to manage Aliases and Zones.

If I used Open Fabric then I had to manage the Zones on the McData and no Aliases.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.