10-07-2016 12:46 PM
I have a few FS8-18 warnings that concern me. I don't have much experience with this blade though. Looks to be running. I have a green light, shows enabled in slotshow and I can see the sfp's and blade info. Here are the warnings:
2016/10/07-19:09:03, [SPC-2013], 371, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_SYSCTLD: Oscillator Failure Detected.
2016/10/07-19:09:03, [SPC-2014], 372, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_SYSCTLD: Low Battery Level Detected.
2016/10/07-19:12:27, [SPC-3010], 377, SLOT 1 | FID 128, WARNING, AFX2515G013, S1, SP_MOD_KPD: SEK integrity failure during initialization.
This DCX is standalone at the moment and has nothing other then power and a serial cable connected. Any help would be appreciated.
10-07-2016 08:26 PM
here are several workaround how to solve the problem, I can try assist you to, however without any kind of warranty.
->This DCX is standalone at the moment and has nothing....
can you confirm the DCX is not in productive environments ?
otherwise you should proceed with the Support and open a TAC.