For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

How to setup a brocade 300 switch

Hi,

We are going to configure brocade 300 switch in our environmental . We are having VMware servers and we didn't have director fabric . we have to connect from hba to brocade 300 and from there to Dell storage . So my question is that we have to go with full fabric switch or access gate switch configuration . We can have NVIP port in full fabric switch also ??? -- raki

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: How to setup a brocade 300 switch

Hi,

If that brocade 300 will be the only switch in the fabric, then you should go with full switch fabric. And yes, NPIV is active by default.

Rgds,

Felipon

Highlighted
Anonymous
Posts: 0

Re: How to setup a brocade 300 switch

Felipon,

Can you provide the configuration steps to configure this switch.

Raki

Regular Contributor
Posts: 165
Registered: ‎05-11-2011

Re: How to setup a brocade 300 switch

Hi Raki,

please look in the FOS Administrator Guide.

Download the Guide for your Firmware from brocade.com.

Regards

Ralf

Kind Regards
Ralf
Anonymous
Posts: 0

Re: How to setup a brocade 300 switch

Thank you Ralf

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.