For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

How to login to 200E switch bypassing RADIUS autorization?

Hello,

External Moderator
Posts: 5,591
Registered: ‎02-23-2004

Re: How to login to 200E switch bypassing RADIUS autorization?

kirche,casually is this probleme by the windows Radius Config or IP problem. make sure that the IP and the Radios is correct configured, and the Radisu is running an there switch.

TechHelp24
Anonymous
Posts: 0

Re: How to login to 200E switch bypassing RADIUS autorization?

Kirill

Anonymous
Posts: 0

Re: How to login to 200E switch bypassing RADIUS autorization?

Dear TechHelp24,Kirill

Anonymous
Posts: 0

Re: How to login to 200E switch bypassing RADIUS autorization?

Disconnect the switch's ethernet connection, so that you can not get a response from the radius server, then use a serial connection to connect to the switch. The local (on switch) password database will then be used when you attempt to log in through the serial port.

Anonymous
Posts: 0

Re: How to login to 200E switch bypassing RADIUS autorization?

also you could shut down the radius server for a minute while you log in. This will force the switch to use its internal database to authenticate you.

Anonymous
Posts: 0

Re: How to login to 200E switch bypassing RADIUS autorization?

Dear i_m_fdet and enesvick,<!graemlin::)> Kirill

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.