Turn on suggestions
![]() Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
|
12-22-2009 03:49 PM
Hello,
Running VMware on HP bladesystem, both sw5480 switches are part of a fabric attached to SAN storage. Recently because of scsi2 reservations issues, the storage luns locked. During the trouble shooting of that problem, the blade chassis were rebooted. After the reboot one of the chassis fiber port on both 5480s is showing no_sync. I have disabled and enabled the port with no luck. This is a live environment.
POD Port: Port is licensed
portState: 2 Offline
portPhys: 5 No_Sync
portScn: 2 Offline
anything I can do about this
james
12-22-2009 09:29 PM
the Port appear set as Offline.
Try portdisable and the portenable
set the port online now
what appeand ?
12-23-2009 09:16 AM
The port remain in the same no_sync state after port disable/enable
12-23-2009 10:01 AM
can you please post here a screen shoot from webtools / port ?
12-24-2009 12:51 AM
what device is connected to this port? can you try to reset this deviceport, too (reset the link on both ends)?
Please double check if the sfp is seated correctly and the cable connected properly on both ends.
regards,
bernd