For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

HBAs missing from FDMI output

New to brocade commands.  Trying to understand the output of the FDMIshow and what it means.

We are missing about 6 HBAs from the commands output on our 4424 Dell Brocades.

Fabric OS  V5.3.0_emb1

Thanks in advance

Dave

Highlighted
Anonymous
Posts: 0

Re: HBAs missing from FDMI output

So far I tried very hard but didn't get mcuh information other than below

"fdmishow display detailed FDMI (Fabric Device Management Interface)

device information"

Good luck for your questions.

Anonymous
Posts: 0

Re: HBAs missing from FDMI output

You have to enable FDMI on the HBA's. If they come with a driver that doesn't support FDMI you're out of luck and have to complain the to the HBA vendor. I agree this is one of the most helpful sections in a supportsave when trying to map and identfy devices in a fabric.

It is part of the FC standard but not every vendor has implemented it on their devices.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.