10-01-2010 07:00 AM
We are running FOS 6.3.0b and wants to introduce access gateways in our san.
Do we need to upgrade the FOS on the access gateways when upgrading the switches to a new FOS?
Thanks! Regards, Ron
10-03-2010 05:10 AM
--->>>We are running FOS 6.3.0b...
--->>>Do we need to upgrade the FOS on the access gateways when upgrading the switches to a new FOS?
Sorry your question is a little confused.....
FOS 6.3.x is AG capable and compatibl, what you want to upgrade to ?
10-03-2010 06:49 AM
Let me try to explain :-)
We have our fabric running on 6.3.0b which is AG capable. So, my intention is to implement all new embedded blade switches to a Access Gateway.
But, if we upgrade the switches to a new FOS, do we need to upgrade the AG's too?
10-03-2010 08:44 AM
--->>> But, if we upgrade the switches to a new FOS, do we need to upgrade the AG's too?
No, is not necessary to take other upgrade in th AG after a FOS Upgrade, excepted the new FOS don't have a note from Brocade or OEM that some other feature and/or settings are necessary to be set.
If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.
12-23-2010 04:15 PM
To answer your question properly, it really only depends on the Brocade FOS release notes. In the release notes for the FOS that you are targeting for your Fabric, there is an "interoperability" matrix. This matrix tells you which FOS levels the target FOS will ISL to.
The best practice especially with Access Gateway is to keep all firmware levels at the same level, however, it is not always possible to keep a consistent FOS level due to ever-changing environments.
The bottom line, is if you read the FOS release notes, it will guide you through what you can and can't connect to.