08-28-2016 10:46 PM
reported in Release Notes FOS 7.4.1c is a similarly issue when FCIP is in Progress
defect was reported with FOS 7.3.1
with follow workaround
Symptom: Extension tunnels on the 7840 may go down and stay in an “in-progress” state.
Recovery: A reboot is necessary to clear this condition.
what ist exact FOS release Installed ?
08-28-2016 10:55 PM
@ Pavel : --> Yes , Spped needs to be changed at remote Switch as well .Currently it is being handled by the client team .
this week HDS has planned the firmware Upgrade , Hope this should resolve issue.
08-28-2016 10:58 PM
@Antonio , We have seen it in the release notes of 7.4.1C. HDS has planned to Upgrade the firmware this week , hope it will fix the issue. Current firmwares is 7.3.0a
08-28-2016 11:06 PM
as per my opinion, if the issue is related to same Defect, you need simple to do a reboot, and the port coming online.
about the Speed:
is the Tunnel troughput more than 1G and less as 5 ?
08-28-2016 11:24 PM
The Switch was already rebooted and ge Ports are online , however the tunnel is not online
The tunnel is configured as between 50Mbs and 100Mbps as a test purpose
11-22-2018 12:30 AM
01-09-2019 07:42 AM
we also had issues with our 7840s, and the final sulution was to upgrade FOS to 8.1.2a. Indeed, we had "bouncing" or "flapping" tunnels,
so it always wen't down, and became up. Can be a deffect in the firmware.
Please share the status of your issue, is it resolved?