For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

Switch Model is Brocade Silkworm 4100 , Don have exact idea about the FOS version.

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

command firmwareshow tells you the Fos release.

Anonymous
Posts: 0

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

Primary Version :-   v5.2.1b

Secondary Version :-  v5.2.1b

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

that is, in deed, an old release and does not have the portbeacon command. Don't you see any message on the flashing port? is it disabled?

Anonymous
Posts: 0

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

I have checked following you instruction with the command protstatsshow <port Number> I din see any error message , But was able to see AMBER light and was able to see Warnings from BROCADE GUI EVENTS TAB.

Anonymous
Posts: 0

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

Please advise if i can go ahead and open a CASE with Brocade as we have downtime coming on 5-June where if this is because of SFP or any hardware faulty we will be able to replace.

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Error messages FW-1436 and FW-1424 in my Brocade logs

Sure, open a case with the switch vendor and taking a look at the logs they will know what is the next step to take

Rgds

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.