05-02-2019 05:39 AM
i'm new to fibre channel, please excuse my current lack of knowledge.
I would like a confirmation this:
I'm about to setup a new small hypervior infrastructure with 3 nodes, 2 brocade switches (G610) an 1 SAN.
Please correct me if i'm wrong.
Those 2 brocades will be configured seperataly for redudancy. So they aren't interconnected at all and vSphere or the HBAs will later on manage the multipathing to the LUNs.
My plan is to configure both switches and zones one after another with the EZSwitch tool, so that they work as two seperated fabrics. I've found a lot of info about the different topolgies, such as fully-meshed, loop, aso. But not much about two single switches, which appears to be the most basic redundant form possible. Somewhere someone once told: It is critical that both switch are not connected, true?
many thanks in advance for your help.
Solved! Go to Solution.
05-02-2019 06:25 AM
--->>>Those 2 brocades will be configured seperataly for redudancy. So they aren't interconnected at all and vSphere or the HBAs will later on manage the multipathing to the LUNs.
--->>>My plan is to configure both switches and zones one after another ...
right, you need simple to create on each switch a config with zone contained target an initiator
but please do that via CLI or simple way from switch webtools itself, is most easy as EZswitch Setup
--->>>....such as fully-meshed, loop...
you can safely ignore mesh or full meshed topology since you have only ONE switch each fabric.
Full mesh topology is very complex and required at least 3 switch in a Fabric, each switch must be connected like a Star each to each other.
05-02-2019 06:35 AM
05-02-2019 08:19 AM - edited 05-02-2019 08:20 AM
If you are intersted in additional SAN training, we now have over 100 Free Brocade Technical training courses available online. Each course includes a short assessment test. After each course is completed, test takers can print a course completion certificate.
We also have some additional training on accessing and utilizing the learning portal:
Additional Training on Brocade Education including the Learning Portal:
Accessing Brocade Education via Learning Portal