For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 31
Registered: ‎09-13-2004

Disabling http

All, the FabricOS (6.1.1) documentation section that describes enabling https shows an example of the configure command with http attributes as an option under the "System services -> ssl attributes".

System services (yes, y, no, n):
  ssl attributes (yes, y, no, n): yes
Certificate File. (filename or none):
        CA Certificate File. (filename or none):
        Select length of crypto key.
(Valid values are 40, 56, and 128.): (40..128)
http attributes (yes, y, no, n): yes
HTTP Enabled (yes, y, no, n): no
Secure HTTP Enabled (yes, y, no, n): yes

i'm not seeing the "http attributes" when running the configure command on either a enabled or disabled switch.

anyone know a way to disable http on a switch that has been configured for https access, or is ipfilter my only choice?


External Moderator
Posts: 5,620
Registered: ‎02-23-2004

Re: Disabling http

exact as vice-versa as descripted in this threads.

as root run this command exact as below, but without the characters " "


HTTP attributes (yes, y, no, n): y     set to n or no
HTTP Restart (yes, y, no, n): y        set to n or no
HTTP enabled (yes, y, no, n):         must be set to no also disable.
ErrorLog Enabled (yes, y, no, n):  
AccessLog Enabled (yes, y, no, n):  
SSLLog Enabled (yes, y, no, n):  
HTTP Port: (1..60000)  
Secure HTTP Port: (1..60000)  
HTTP IsAlive Check Enabled (yes, y, no, n):     must be set to no
HTTP Max HeapSize: (256..1024)  
webtools attributes (yes, y, no, n):  
cal attributes (yes, y, no, n):

Posts: 31
Registered: ‎09-13-2004

Re: Disabling http

thanks i found that after i posted the question.

perhaps one day the documentation will be updated

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.