Turn on suggestions
![]() Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
|
10-13-2010 01:19 AM
Output from the reboot below:-
Booting "Fabric Operating System" image.
Read map file failedd ID to platform index
Resetting ATA controller.
Chec
Read map file failedds any key to stop tes
Resetting ATA controller.
Retry reading the first kernel image
Syste
Resetting ATA controller.OST RAM Test succeeded.
Retry reading the first kernel image
Press escape within
ATA()0x9dfc7's entry point is too small (0x00003DB8 < 0x00100000)
Booting "Fabric Operating System" image.
Booting "Fabric Operating System" image.ead map file failedd
Resetting ATA controller..
Blk map has an invalid version 0
Resetting ATA contro
Blk map has an invalid version
The system is coming up, please wait...OSLoader has an invalid magic number (0
Read board ID of 0x88 from addr 0x23
Resetting
Read extended model ID of 0x26 from addr 0x22OSLoader has an invalid magic number (0x00000
Matched board/model ID to platform index 17
ATA()0x1a24e8's entry point i
Read board ID of 0x88 from addr 0x23
Read extended model ID of 0x26 fr
Booting "Fabric Operating System" image.Read board ID of 0x88 from addr 0x23
Read map file failedd
Read exten
Resetting ATA controller.addr 0x22
Read map file failedd
Matched board
Resetting ATA controller.x 17
Retry reading the first kernel image of 0x88 from addr 0x23
Blk map has an invalid version 0
Blk map has an invalid version 0
ThisOSLoader has an invalid magic number (0x00000000)
Resetting ATA controller.
ThisOSLoader has an invalid magic number (0x00000000)
ATA()0x1a24e8's entry point is too small (0x00000000 < 0x00100000)
OSLoader contains no bootable devices.
The system is coming up, please wait...
Read board ID of 0x88 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Read board ID of 0x88 from addr 0x23
Read extended model ID of 0x26 from addr 0x22
Matched board/model ID to platform index 17
Press escape within 4 seconds to enter boot interface.
1) Start system.
2) Recover password.
3) Enter command shell.
Option?
> printenv
AutoLoad=yes
ENET_MAC=00051E903A57
InitTest=ATA()
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSLoadOptions=quiet;quiet
OSLoader=ATA()0x9dfc7;ATA()0x1a24e8
OSRootPartition=hda1,hda2
SkipWatchdog=yes
gatewayip=192.168.20.5
ipaddr=192.168.20.5
sbumask=255.255.255.0
>
What should i do?
10-13-2010 09:31 PM
That show to me as Hardware defective.
If the switch is under maintenance by Brocadeor they Vendor, open a call to procede with replacement.
If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.
Thank you.
10-13-2010 09:57 PM
Come out that can not read confirmation result CF card.
Perhaps, is method that can format CF card and remount Packge?
10-13-2010 10:03 PM
Such methode is available but only from Brocade Support.
You need here a special Boot File in order to reload a FOS.
10-14-2010 12:50 AM
Is no there method that can receive boot image?
10-25-2010 10:59 AM
You can obtain this Boot Image only from Brocade when the Switch is Under Maintenance Contract.