04-23-2014 12:26 PM
Is there documentation anywhere that describes each option for the configure tool (ie switchdisable,configure (set local switch parameters) to change settings? I noticed there are some differences when I do a configshow on a switch running 7.0 and a switch running 7.2.
Thanks in advance
04-24-2014 08:24 AM
hmm configshow shows a lot of output.
Some need to be identicall on all switches like
Some are ment to be different like the DID.
Can you post an overview of the differences you are concerned about?
04-24-2014 10:40 AM
some of them are documented in the FOS Command Reference guide under configure:
04-25-2014 07:15 AM
My vendor is telling me I should be able to set the following settings:
ssl attributes (yes, y, no, n): [no] yes
Certificate File. (filename or none): [10.33.13.182.crt] 184.108.40.206.crt
CA Certificate File. (filename or none): [none]
Select length of crypto key.
(Valid values are 40, 56, and 128.): (40..128) 
http attributes (yes, y, no, n): [no] yes
HTTP Enabled (yes, y, no, n): [yes] no
Secure HTTP Enabled (yes, y, no, n): [no] yes
However I do not see the http attribute fields in 7.2.