For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

Re: Brocade Silkworm 2400 connection to JBOD

Hi

I tried the above commands, but still no luck

BROCADE:admin> portshow 2

portFlags: 0xc0020041    PRESENT U_PORT LED CFG_L_PORT DISABLE_EPORT

portType:  3.1

portState: 2    Offline 

portPhys:  6    In_Sync 

portScn:   0            

portRegs:  0x80010000

portData:  0x102f8290

portId:    011200

portWwn:   20:02:00:60:69:20:1f:59

portWwn of the device(s) connected:

        None

Distance:  normal

Speed:     1Gbps  

Interrupts:   3856       Link_failure: 0          Frjt:         0         

Unknown:      2157       Loss_of_sync: 38         Fbsy:         0         

Lli:          3001       Loss_of_sig:  7         

Proc_rqrd:    3          Protocol_err: 0         

Timed_out:    0          Invalid_word: 156       

Rx_flushed:   0          Invalid_crc:  14        

Tx_unavail:   0          Delim_err:    0         

Free_buffer:  0          Address_err:  3         

Overrun:      0          Lr_in:        0         

Suspended:    0          Lr_out:       0         

Parity_err:   0          Ols_in:       0         

                         Ols_out:      1673      

BROCADE:admin>

Also,

BROCADE:admin> nsshow

{

Type Pid    COS     PortName                NodeName                 TTL(sec)

N    011000;      3;21:02:00:e0:8b:4e:bc:b3;20:02:00:e0:8b:4e:bc:b3; na

    FC4s: FCP

    NodeSymb: "QLA2344 FW:v3.03.25 DVR:v9.1.7.18"

    Fabric Port Name: 20:00:00:60:69:20:1f:59

The Local Name Server has 1 entry }

BROCADE:admin>

Any other idea??

Highlighted
Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Brocade Silkworm 2400 connection to JBOD

Hi,

Command portcfglport has the following parameters:

Usage: portCfgLport PortNumber  <0 | 1>

You could try to configure all the different possibilities to see if any of them makes the device to get online. Try, on port 2, to configure a Public Loop instead of  a private one, for example.

BROCADE:admin>portcfglport 2 1 1 <-- private Loop

BROCADE:admin>portcfglport 2 1 0 <-- public Loop

rgds

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.