Brocade 4800 FR4-18i blade

[Anonymous]

I have Brocade 48000 chassis. We recently bought FR4-18i blade. When I put it in the chassis I have these messages: 2007/04/04-20:46:20, , 119,, INFO, SilkWorm48000, FRU Slot 4 insertion detected.2007/04/04-20:46:20, , 120,, WARNING, SilkWorm48000, Sysctrl reports error status for blade ID 20 for the blade in slot 42007/04/04-20:46:20, , 121, FFDC, CRITICAL, SilkWorm48000, Unit in Slot 4 faulted, incompatible with chassis option 5----

---

[Antonio Bongiorno T…]

Hi Vitocapri,NOTE! EM-1046 indicate the Header this Blade is Corrupted and the blade must be replaced!

[Antonio Bongiorno T…]

I just note follow,Are they Sure that the ID show is 20 ? Can you confirm ?

[Anonymous]

Thank you for quick answer. Yes, it shows up as ID 20. Looks like blade indeed bad.

[Antonio Bongiorno T…]

OK, have the Blade 16 Port and Additional One Console Port and One Ethernet Port ? Or can you Upload here a PIC this Blade ?And the Exact Brocade Part Number is Label on Board ?

[Anonymous]

I see this info: D1846, 40-0300108-01 Rev.A, D1858, barcode with MN030000152.Thank you

[Antonio Bongiorno T…]

Hi Vitocapri,Problem is Solved !

[Antonio Bongiorno T…]

To confirm my last Answer, i found in Google a PIC this Blade. Is this the Same Blade you have ?See attach.

[Anonymous]

Thanks a lot! Will contact our vendor.

[Antonio Bongiorno T…]

-&gt;&gt;&gt; Thanks a lot! <BR><BR>No Problem. <img src="http://boards.brocadeconnect.com/groupee_common/emoticons/icon_wink.gif" alt="Wink" width="15" height="15">&lt;!graemlin:;)&gt;<BR><BR>-&gt;&gt;&gt; Will contact our vendor....and many greating to you Vendor.