For more details, please see ourCookie Policy.

Fibre Channel (SAN)

Posts: 28
Registered: ‎12-05-2008

BR-310 Port No_Sync problem


I have a BR-310 switch,Version v6.2.0c,  connect device, switchshow output display:

switchName: swd77
switchType: 71.2
switchState: Online  
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:c4:4d:9b
zoning:  OFF
switchBeacon: OFF

Area Port Media Speed State     Proto
  0   0   id    N4   No_Light        
  1   1   id    N4   No_Light        
  2   2   id    AN   No_Sync         
  3   3   id    AN   No_Sync         
  4   4   id    AN   No_Sync         
  5   5   id    AN   No_Sync         
  6   6   id    AN   No_Sync         
  7   7   id    AN   No_Sync         
  8   8   --    N8   No_Module        (No POD License) Disabled

FOS upgrade: v6.2.0c --v6.3.0d--b6.4.2b--v7.0.0b;

Problem is still not sloved.

Valued Contributor
Posts: 559
Registered: ‎03-20-2011

Re: BR-310 Port No_Sync problem

Lucky_li, what do you connect to these ports?

No_Sync means there's some light signal but port can't sense the speed...

What do you see when you type sfpshow/portshow/porterrshow/portstatsshow?

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.