10-18-2016 02:58 AM
I'm newbie with SNMP setting,
Can someone give me answer?
I want to know B7800 Fabos Version 7.1.0c which version of SNMP that supported on this model and OS?
Solved! Go to Solution.
10-18-2016 03:12 AM
you can use SNMPv1 and SNMPv3.
10-18-2016 04:07 AM
IMHO it is called snmpv1, for example in the config command, but it does support at least large parts of v2c.
test@host:~$ snmpbulkwalk xx.yy.zz.aa -c public -v 2c SNMPv2-MIB::sysObjectID.0 SNMPv2-MIB::sysObjectID.0 = OID: SW-MIB::sw.62
Not tested with your exact hardware and FOS versions though.
10-18-2016 04:18 AM - edited 10-18-2016 04:36 AM
The embedded CLI command (snmpconfig) for setting up FOS for sending traps/inform just supports as said SNMPv1 and SNMPv3.
But maybe I got you wrong and you just want to run an snmpwalk on the switch, if so you have to download the appropriate MIBs for your FOS code from mybrocade. Following a short output from our MIB Reference Guide:
"Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version. All versions of Fabric OS support SNMPv1 and SNMPv3. All versions of Fabric OS other than Fabric OS v6.1.2_CEE support SNMPv2c, but do not support trap/inform."
Hope that helps.