For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

Re: Adding a third switch to an existing fabric

From the exempt you referenced:I'm going to pass this by my manager and try it out probably in the coming week or two... I will let you know.

External Moderator
Posts: 5,594
Registered: ‎02-23-2004

Re: Adding a third switch to an existing fabric

Correct, the WebTools is not longer Available on the switch whit a 2 Domain License.But probably that work.

TechHelp24
Anonymous
Posts: 0

Re: Adding a third switch to an existing fabric

TechHelp24,Thanks again for the help. I will let you know what I find in about a month or so.

Anonymous
Posts: 0

Re: Adding a third switch to an existing fabric

The webtools were disabled on the 3250. The switch did remain in the fabric and could be configured via CL. But you would always get the following error message being repeated over and over again:Webtools still worked on the 3200s though.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.