For more details, please see ourCookie Policy.


Fibre Channel (SAN)

Reply
Anonymous
Posts: 0

24000 Ha State out of sync

Hi,

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

What's the output of a firmwareshow?

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

Hi,Chris

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

And if you try a firmwaredownload -s on your standby CP what happens?

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

try haSyncStart

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

Hi,Normally i reboot the active cp, but i will avoid a failover to the standby cp because i will avoid a interrupt of the traffic of the high availibility applications.

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

So you are able to succeed with a new firmwaredownload -s? You don't get any failure messges? If you do get failures, paste them here plesae.

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

sorry for the delay to answer.Only HA State not in sync tells me the problem.

Anonymous
Posts: 0

Re: 24000 Ha State out of sync

You may need to call support. I would try re-seating the standby and see if that jogs it loose, but after that I'd call support.

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.