For more details, please see ourCookie Policy.


Ethernet Switch

Reply
Highlighted
Occasional Contributor
Posts: 9
Registered: ‎09-27-2016
Accepted Solution

BCM53134 IMP port as a regular port

How to configure BCM53134 to use port8/IMP as a regular port?

Thanks in advance,

Paulo Ribeiro

Broadcom
Posts: 300
Registered: ‎02-15-2016

Re: BCM53134 IMP port as a regular port

Hi,

It requires to configure the 53134 IMP port as below for a regular port.

1. set Reg(0x00: 0x0b)=0x06

2. set Reg(0x00: 0x0e)=0x8b to force IMP link up at 1000Mbps for example.

2. set Reg(0x00: 0x22)=0x0040

Thanks,

Ryan

Occasional Contributor
Posts: 9
Registered: ‎09-27-2016

Re: BCM53134 IMP port as a regular port

Hi,

In BCM53134 Register Programming Guide (53134-PR101-R, 2016 Jan 29) there is no register 0x22 in page 0x00.

Could you please confirm the required configuration to use IMP port as a regular port?

Am I using a deprecated edition of the register programming guide?

Thank you,

Paulo

Broadcom
Posts: 300
Registered: ‎02-15-2016

Re: BCM53134 IMP port as a regular port

Hi,

This internal register Reg(0x00: 0x22) is required for IMP port as unmanaged mode regular port usage, it is to enable IMP port forwarding in unmanaged mode operation.

We are updating the PR doc and will add this register information in PR doc.

Thanks,

Ryan

Occasional Contributor
Posts: 9
Registered: ‎09-27-2016

Re: BCM53134 IMP port as a regular port

Hi Ryan,

For when do you foresee the new release of the BCM53134’s PR doc?

Thanks,

Paulo

Broadcom
Posts: 300
Registered: ‎02-15-2016

Re: BCM53134 IMP port as a regular port

Hi Paulo,

We are working on it and plan by end of April.

Thanks,

Ryan

Broadcom
Posts: 300
Registered: ‎02-15-2016

Re: BCM53134 IMP port as a regular port

Hi Paulo,

The PR doc has been updated to PR103 and posted.

Please double check it.

Thanks,

Ryan

Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.