For more details, please see ourCookie Policy.

Application Delivery (ADX)

Posts: 0

Remote-Cache doesn't work

Dear All,

I already realized that remote-cache I configured doesn't work whatever I put "remote-cache" command in cache-name. I configured a cache server's gateway to the Layer3 switch and used /30 for connection between L3 and ServerIron. I checked every basic connection and all of them can ping eachother.

When I used command "show cache-group" on the ServerIron I found result like below:


The result above shows connection client-to-cache only -- no cache-to-client, no webserver-to-cache, no cache-to-webserver. I reay don't know how to make it work. Please give me your advice.

Lab diagram


ServerIron Configuration


server port 80
tcp l4-check-only
server cache-name cs1
port http
port http url "HEAD /"
server cache-group 1                                             
cache-name cs1


vlan 1 name DEFAULT-VLAN by port
ip l4-policy 1 cache tcp http global
ip route


By the way, I attached full configurations for L3 swithc (FCX), ServerIron (ADX1000) and Diagram in this.

Best Regards,


Join the Broadcom Support Community

Get quick and easy access to valuable resources across the Broadcom Community Network.