Protection Engine for Network Attached Storage

 View Only

Configure SPE to work with NetApp Filer 

Aug 24, 2015 03:25 AM

There is an introduction about the Symantec Protection Engine (SPE):

https://www-secure.symantec.com/connect/articles/introduction-symantec-protection-engine-network-attached-storage

SPE can work with NetApp Filer to run virus scan for the shared files. Here are the steps to configure the SPE to work with NetApp Filer:

1. Create a user in AD, this user will be used to run the service of SPE, and also will be added into the group in NetApp accordingly:

SPE_NAS_01.png

2. Log into NetApp System Manager:

SPE_NAS_02.png

3. Choose 'ontap' --> 'Configuration' --> 'Local Users and Groups' --> 'Groups', select the 'Backup Operators' group:

SPE_NAS_03.png

4. Edit the group properties:

SPE_NAS_04.png

5. Add the domain user that created in step1 into the group:

SPE_NAS_05.png

6. Save and close the group properties:

SPE_NAS_06.png

7. From the NetApp command-line, run the command to enable vscan service: vscan on

SPE_NAS_07.png

8. Run this command to add the IP address of SPE into the vscan scanner list: vscan scanners secondary_scanners 192.168.1.200

SPE_NAS_08.png

9. Back to the SPE, configure the Log On of the SPE service into the domain account that created in step1:

SPE_NAS_09.png

10. Restart the SPE service

11. Log into SPE admin console, add the IP address of the NetApp into the RPC list:

SPE_NAS_10.png

12. Restart the SPE service, then the SPE can work with NetApp Filer.

Statistics
0 Favorited
7 Views
0 Files
0 Shares
0 Downloads

Tags and Keywords

Related Entries and Links

No Related Resource entered.