Network Access Control

Expand all | Collapse all

SEPM High Availability Issue with Lan and Gateway Enforcers

  • 1.  SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-09-2013 09:12 PM

    Hi Guys,

     

    So we already build the HA Setup of our two SEPM and it's working now, but one thing we noticed is that the lan and gateway enforcers are not visible on the Admin->Servers Menu on the Second SEPM, though it was configured and running with SNAC on the first SEPM, how can we fix this?

    Thanks,



  • 2.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-10-2013 02:08 AM

    Connecting the LAN Enforcer to a Symantec Endpoint Protection Manager



  • 3.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-10-2013 02:55 AM

    so that's just it?



  • 4.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-10-2013 10:59 AM

    I men,

    I almost sure you need configure a replication if have a high availability because into the enfocers exist a unique Management Server List with all the SEPM.

    I suppose you dont have Replication configure in your enviorement is correct??, or you describe me your enviorement for give mor e reference aboute the case.

    Hope this helps,

    Regards.



  • 5.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-10-2013 09:58 PM

    Hi,

     

    all I did is to install a new SEPM server and configure it on load balancing / failover nothing else. what can you say?

     

    Thanks,



  • 6.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-11-2013 11:17 AM

    Hi men.

    Can you describe your enviorement because is more easy help?, you shared the database with the SEPM´s ?? DId you use the Embedded Database?? Why dont use the Replication instead of fail over configuration??

    Thanks.



  • 7.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-13-2013 02:08 AM

    Wattup,

     

    Yes we have 1 SQL server where the SEPM1(original) is connected then we add SEPM2 and is also connected on the SQL server, so basically it looks like a triangle, but only the SEPM1 have the lan and gateway enforcers visible.

    is this good enough?

     

    Thanks,



  • 8.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-13-2013 11:12 AM

    Ok, what show the managament Server List in your Policy Components, Could you catch an snapshot and put it?, because is more important have this parameter correctly configurated.

    Hope your response.

    Regards.



  • 9.  RE: SEPM High Availability Issue with Lan and Gateway Enforcers

    Posted 09-15-2013 09:02 PM

    Hi,

     

    I dont have screenshot right now but it is configured as both server is on priority 1, all the possible names ar included, hostname, ip fqdn, etc.

     

    Thanks,