Data Loss Prevention

 View Only
  • 1.  DLP Increasing the inspection content size

    Posted Jul 01, 2021 12:46 PM
    Hello,

    As I've seen in the article Increasing the inspection content size (broadcom.com) the inspection content size for detection could be changed. Could the value be custom (es: 50MB) or only one of these value: 30 MB, 100 MB, 150 MB, 500 MB, or 2 GB?

    Thank you in advance.

    Best regards,
    Francesco


  • 2.  RE: DLP Increasing the inspection content size

    Trusted Advisor
    Posted Sep 23, 2021 01:16 PM

    So this was changed recently, before it was a free form setting in the advanced Server config, but there was no CHECKING of what the system was capable of doing. You could have set it to 100MB and the system would crash if overloaded and you only had 4GB on the whole server. 

    NOW, it is a slider setting for each Server (Easier to do).
    It is also based on the specifications of the server, so it will ONLY allow you to move the slider based on the memory available on the server.
    So there is a sanity check to make sure you don't set it to a value that is too high. 

    So to answer your questions, those are the only options available.



    ------------------------------
    Good Luck. - RP
    PLEASE MARKED SOLVED WHEN POSSIBLE
    ------------------------------