RO67699 can be found here:
https://support.broadcom.com/download-center/solution-detail.html?aparNo=RO67699&os=z%2FOSNote that it's an r18.5 APAR - it's fixed in source in r19.0.
And yes, the display only appears if zIIP is in use.
------------------------------
Principal Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 11-24-2020 07:01 AM
From: JESUS MARTINEZ LORRIO
Subject: Can IDMS benefit from a ZIIP processor?
Hi All,
Thanks for your links about zIIp, Brian. They have been very clarifying now that we have zIIP processors and we are going to start using them.
In article https://knowledge.broadcom.com/external/article?articleId=43611
mention at the end as a additional information:
RO67699 Title: DISPLAY TOTAL NUMBER OF SWAPS ON DMCT D STAT SYS
I have not been able to find it and in the DCMT D STAT output I do not see anything about SWAP. I imagine it will appear once the use of zIIPs is activated. Is it so?
Anyone know anything about RO67699?
Regards
Original Message:
Sent: 11-18-2020 04:29 PM
From: Brian Brendlinger
Subject: Can IDMS benefit from a ZIIP processor?
Hi Dan,
Here is the first page of the documentation on the topic of zIIP Exploitation in IDMS
https://techdocs.broadcom.com/us/en/ca-mainframe-software/database-management/ca-idms/19-0/administrating/administrating-ca-idms-system-operations/z-os-specific-features/ziip-exploitation.html
Also 3 helpful Knowledge Articles
https://knowledge.broadcom.com/external/article?articleId=39312
https://knowledge.broadcom.com/external/article?articleId=43611
https://knowledge.broadcom.com/external/article?articleId=20350
Original Message:
Sent: 11-18-2020 04:20 PM
From: Dan Kolb
Subject: Can IDMS benefit from a ZIIP processor?
I was asked if IDMS could benefit from or untilize a ZIIP processor. They are telling me the ZIIP processor can take some of the workload at a lower cost. So they are checking all the other applications to see is it could be worth more effort.
I started looking around, but it may be quicker to ask the group.