Lennie,
On DB.3.2 screen are there pred specifications by SCHID?
What CA7 command was entered to view the preds? Was it a command that shows the 'satisfied' and 'unsatisfied' requirements?
For Example:
LQ,JOB=STARTCRT,LIST=RQMT
LIST=RQMT JOB=STARTCRT DATE=21.054 PAGE 0001
JOB QUEUE CA-7 -DAY(DDD) AND TIME(HHMM)-- CPU SCH ENTRY MSTR JOB
NAME NAME JOB# DEADLINE SUB/START DUE-OUT SPEC/RUN ID MODE REQ STATUS
STARTCRT REQ 4431 054/1654 *NONE* 054/1700 ALL- 001 SSCN 001
------------------------- REQUIREMENTS STATUS -------------------------
___X___ INTERNAL JOB=DA29 DATE/TIME=21054/1445 (JOB )
_______ INTERNAL JOB=DYA20 DATE/TIME=21054/0735 (JOB )
___X___ INTERNAL JOB=UV52 DATE/TIME=21054/1500 (JOB )
SLIF-00 REQUEST COMPLETED AT 15:10:39 ON 21.054
Thanks,
Bob Scheideler
Mutual of Omaha
Original Message:
Sent: 02-22-2021 02:04 PM
From: Lennie Currington
Subject: Requirement Jobs
I have a job which is a requirement to another job. This past weekend it was noticed that Job A ran without waiting for the requirement job. I have looked back through the history archive tapes to see if maybe someone had posted the requirement and did not see this as happening. I demanded in my job A on hold to look at the requirements and noticed that my requirement job was not there in the list of jobs. I then tried adding the requirement to a test job and demanded in the test job and the requirement did not show on the test job either. I have compared a lot of different jobs on the DB.1 screen to see if there was a difference there and did not see any difference. Has anyone else had an issue where a requirement does not show up after being added?