InterTest

 View Only
  • 1.  CA Intertest v11.0 WTO message-error deleting exit pad

    Posted May 16, 2019 01:28 PM

    weird WTO message when using CA Intertest v11.0 batch link facility.

    waiting days for CA support to answer our question regarding message.

    IMS/DB cobol application using BMP/Cope.

    program does nothing but a display current date and goback(deliberately did this to reduce 'complexity' of issue).

     

    executing program without using batch link facility and I get normal IMS/Cope messages.

    submit job/connect to waiting job via BLF... enter GO and reviewing jesmsglg I see:

     

    12.58.50 JOB21819  +COP046  Calling DFSRRC00, tasklibs=SYS00015 STEPLIB                                                          
    12.58.53 JOB21819  +DFS0578I - READ SUCCESSFUL FOR DDNAME PROCLIB  MEMBER = IM3UDB2T  IM3U                                       
    12.58.56 JOB21819  +COP209 Saving LLE chain                                                                                      
    12.58.56 JOB21819  +COP210 51 module names saved                                                                                 
    12.58.58 JOB21819  $HASP375 INFOJDFN ESTIMATED  LINES EXCEEDED                                                                   
    12.59.16 JOB21819  +ERROR DELETING EXIT PAD                                                                                      
    12.59.16 JOB21819  IEC205I CAMRDBUG,INFOJDFN,INFOS050,FILESEQ=1, COMPLETE VOLUME LIST,  204                                      
       204             DSN=TEST.CS98.TC4415.CAMRDBUG.F1,VOLS=I59470,TOTALBLOCKS=682959                                               
    12.59.17 JOB21819  IEF234E K 17FF,I59470,PVT,INFOJDFN,INFOS050                                                                   
    12.59.17 JOB21819  -                                             --TIMINGS (MINS.)--                           -PAGING  COUNTS-  
    12.59.17 JOB21819  -STEPNAME PROCSTEP PROGRAM     RC   EXCP      CPU    SRB    CLOCK   REGION   SERV SERVCLS   PAGE  SWAP   VIO  
    12.59.17 JOB21819  -INFOS050          CAMRBL01    00   703K     0.13   0.03     2.95    6144K  1230K BATCHM2      0     0     0  
    12.59.17 JOB21819  -INFOJDFN ENDED.  NAME-IMS                  TOTAL CPU TIME=     0.13      TOTAL ELAPSED TIME=     2.95        
    12.59.17 JOB21819  $HASP395 INFOJDFN ENDED - RC=0000                                                                             

     


    anyone know where '+error deleting exit pad' WTO is coming from ??                                                                            



  • 2.  Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Broadcom Employee
    Posted May 16, 2019 04:14 PM

    Hi Doug,

     

    Thanks for the question. Currently official case opened(1363393) with Terry Self and working on this.

     

    Regards,



  • 3.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Posted Jun 03, 2019 11:03 AM
    still no solution.
    17 days and counting.​


  • 4.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Posted Jun 03, 2019 11:03 AM
    ​still no answer.
    WTO message appears even when I do NOT intercept the program.
    I execute camrbl01 for batch link facility; do not specify a program to intercept.


  • 5.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Broadcom Employee
    Posted Jun 04, 2019 11:02 AM
    Thanks for bringing this to our attention. The issue has been escalated and I believe the team contacted you with the next steps.

    ------------------------------
    Offering Manager for Open Mainframe and Mainframe DevOps
    Broadcom
    ------------------------------



  • 6.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Broadcom Employee
    Posted Jun 04, 2019 11:26 AM
    Hello Doug, 
    I understand SE has attached a test solution to your case 1364739 this morning. If you could please review, apply fix and then let us know the results by responding within the case, that would be great. 

    Best Reagrds, 
    Joe Nestor
    Mainframe Support Manager


  • 7.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Posted Jun 04, 2019 04:50 PM
    ​case 1364739 was for backtrace not showing symbolic values in working storage correctly(cics). I am awaiting PTF install to retest.


  • 8.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Broadcom Employee
    Posted Jun 05, 2019 10:22 AM
    Hello Doug, 
    I am sorry for the confusion of my previous update to you. I do see that both cases are being actively worked by our Sustaining Engineering team.
    May I ask that you give me a call at 609-493-5835 if you have any questions or concerns about either case. I would be happy to have a 
    conversation to level set and address any ongoing concerns you might have. 

    Best Regards
    Joe Nestor
    Mainframe Support Manager
    Joseph.Nestor@Broadcom.com


  • 9.  RE: Re: CA Intertest v11.0 WTO message-error deleting exit pad

    Posted Jun 04, 2019 04:50 PM
    ​We think SLIP dump is of much useful compared to CAMRDBUG, however if needed we will let you know about CAMRDBUG.

    Can you please set the below SLIP and share the SVC Dump and Joblob with us for further analysis.

     

    SLIP SET,IF,PVTMOD=(CAMRTEXI,00000182,0000018A),A=SVCD,ML=1,JOBNAME= <Your job name - INFOJDFN>,ID=EXPD, SDATA=ALL,END 

     sdata=all is invalid parameter.
    what should we use?

    here are valid options

    ALLNUC
    ALLPSA
    COUPLE
    CSA
    GRSQ
    HCSAByASID
    HCSANoOwner
    HCSASysOwner
    LPA
    LSQA
    NOALLPSA
    NOSQA
    NOSUMDUMP
    NUC
    PSA
    RGN
    SQA
    SUMDUMP
    SWA
    TRT
    WLM
    XESDATA