After putting on CA 1 maintenance that updated a health check the HCK policy
is no longer working and is issuing a message
HZS0420E n CHECKS HAVE BEEN FOUND FOR WHICH AT LEAST ONE MATCHING
POLICY STATEMENT HAD A CONFLICT WITH THE CHECK VALUES.
THE POLICY STATEMENTS WERE NOT APPLIED TO THOSE CHECKS.
The policy statement was:
Update Check(CA_1,CA1_FREE_DSNB_QUICK_SCAN)
Date(20120911,Nocheck)
Inactive
Reason('Inactivate CA Global Check on This LPAR')
IBM documentation of the DATE in the policy says to use the NOCHECK to bypass the date verification so that you do not have to update the policy each time the health check is changed.
If your POLICY UPDATE statement contains any of the following, NOCHECK is ignored: PARM, ACTIVE, INACTIVE, SEVERITY, or INTERVAL. NOCHECK is also ignored for a POLICY DELETE statement.
To find the correct date to put in the policy statement you can browse the CTAPLINK library for the specific health check module. When you browse the module you are looking for the DATE that is shown after the RMID information. Here is a list of the CA 1 and TLMS modules by health chech name and with the dates as of 6/6/2014.
CA 1 checks.
In the load module look for the CAL0C60 and the RMID statement, the date will follow the RMID.
Check name Module FMID RMID Date
CA1_Vrfy_Security_Exit_FUNC TMSHC001 CAL0C60 RMID(RESERVE) 20110218
CA1_Vrfy_Security_Exit_YSVC TMSHC002 CAL0C60 RMID(RESERVE) 20110218
CA1_TMC_Audit_Placement TMSHC003 CAL0C60 RMID(RESERVE) 20110218
CA1_Free_DSNB_Medium_THRSH TMSHC004 CAL0C60 RMID(RO61639) 20130801
CA1_Vrfy_Security_Exit_PSWD TMSHC005 CAL0C60 RMID(RESERVE) 20110218
CA1_used_DSNB_free_chain TMSHC006 CAL0C60 RMID(RO61639) 20130801
CA1_Vrfy_Mixed_Expdt_Option TMSHC008 CAL0C60 RMID(RESERVE) 20110218
CA1_Audit_Vrfy_Within_Med_THRSH TMSHC009 CAL0C60 RMID(RO61639) 20130801
CA1_Audit_Vrfy_Within_Low_THRSH TMSHC010 CAL0C60 RMID(RO61639) 20130801
CA1_Free_DSNB_Low_THRSH TMSHC011 CAL0C60 RMID(RO61639) 20130801
CA1_Free_DSNB_Quick_Scan TMSHC012 CAL0C60 RMID(RO65354) 20140409
CA1_Vrfy_Option_DCHG TMSHC013 CAL0C60 RMID(RESERVE) 20110218
CA1_Vrfy_Option_LCHG TMSHC014 CAL0C60 RMID(RESERVE) 20110218
CA1_Vrfy_Option_TCHG TMSHC015 CAL0C60 RMID(RESERVE) 20110218
CA1_Vrfy_Security_Profile_TAPE TMSHC016 CAL0C60 RMID(RO54501) 20130320
CA1_Vrfy_Security_Profile_CMD TMSHC017 CAL0C60 RMID(RO54501) 20130320
TLMS checks.
In the load module look for the CATLC60 and the RMID statement, the date will follow the RMID.
Check name Module FMID RMID Date
TLMS_QUEUE_ACTIVE TLMSH001 CATLC60 RMID(RESERVE) 20110218
TLMS_VMF_ALOG_SEPARATION TLMSH002 CATLC60 RMID(RESERVE) 20110218
TLMS_AUX_CUSHION_CRITICAL TLMSH003 CATLC60 RMID(RESERVE) 20110218
TLMS_AUX_CUSHION_WARNING TLMSH004 CATLC60 RMID(RESERVE) 20110218
TLMS_VMF_UPDATE_NOT_POSSIBLE TLMSH005 CATLC60 RMID(RESERVE) 20110218
TLMS_OPTION_NOTLMS TLMSH006 CATLC60 RMID(RESERVE) 20110218
TLMS_OPTION_PROTECT TLMSH007 CATLC60 RMID(RESERVE) 20110218
TLMS_OPTION_RECOVRY TLMSH008 CATLC60 RMID(RESERVE) 20110218
TLMS_OPTION_SECOPN TLMSH009 CATLC60 RMID(RESERVE) 20110218
TLMS_OPTION_SECURE TLMSH010 CATLC60 RMID(RESERVE) 20110218
Here is the updated POLICY statement using the corrected date from the above table.
Update Check(CA_1,CA1_FREE_DSNB_QUICK_SCAN)
Date(20140409,Nocheck)
Inactive
Reason('Inactivate CA Global Check on This LPAR')