Discovery and Inventory Group

Expand all | Collapse all

Right Click Action to assign Barcode Number

  • 1.  Right Click Action to assign Barcode Number

    Posted 06-12-2012 06:53 PM

    Hi

    I want to create a right click action that opens a view where you can set the barcode value on an asset manually.
    From my experience the "edit" botton takes to long to load and I want something faster for such a common task as assigning barcode number.

    Right Click - > Assign Barcode -> Enter Barcode -> Save

    Does anyone know if this can be done? Is it possible to create a View that only shows the barcode field on an asset that accepts the asset guid as a parameter?

    Torb

     



  • 2.  RE: Right Click Action to assign Barcode Number

    Posted 06-14-2012 08:18 AM

    Thank you Triinu.

    But unfortently I feel this still takes to many steps to take just to assign a barcode.

    Torb

     

     



  • 3.  RE: Right Click Action to assign Barcode Number

    Posted 06-14-2012 06:14 AM

    Hi Triinu

    Do you mean the Barcode simulator that's included with Barcode solutions?

    Please let me know where I can find this function.

     

    Torb



  • 4.  RE: Right Click Action to assign Barcode Number

    Broadcom Employee
    Posted 06-14-2012 08:31 AM

    but unfortunately there is no simpler/faster way currently available.



  • 5.  RE: Right Click Action to assign Barcode Number

    Broadcom Employee
    Posted 06-14-2012 01:48 AM

    currently it is not possible to create such a view.

    However, there is Assign Barcode menu function that lets you select an item by scanning the Serial Number and then assigning the Barcode. Would this be something that you could use?



  • 6.  RE: Right Click Action to assign Barcode Number

    Broadcom Employee
    Posted 06-14-2012 06:55 AM

    the Assign Barcode menu is available on the Barcode Device (also called handheld device or Barcoder).

    On the device, click Update > Assign Barcode, and then you see the following screen:

    Note that the Assign Barcode System Template must be enabled for the profile that you are using. (see the screen below)