Packet Shaper | How to restore config only Class

[Chakuttha Riyaphan]

Dear All,

  Please recommend if i would like backup only class not all configuration and restore to other appliance.

How to do it?

 

Thank you for your help.

 

Best Regards,

Chakuttha R.

[Aboonaim Golandaz]

Dear Chakutha,

 

We have only 2 backup on PAcketshaper.

 

1) Config save

2) setup capture complete "filename"

 

PacketShaper automatically stores your settings in a file named config.ldi. In addition, you can save a configuration on demand, using the config save CLI command. This command creates two files. The .ldi file contains the traffic tree configuration (including all classes, class IDs, partitions, policies, host lists), as well as all sharable configuration settings such as packet shaping, traffic discovery, passwords, SNMP, SNTP, and Syslog.

The .cmd file contains the nonshareable settings such as IP address, gateway, date, time, and network interface settings.

 

BR

Aboonaim

----------

If you are satisfied with an answer, please click "Accept Solution"

 

 

[pakorn amonstian]

Copy file in 9.256/CFG/config.ldi 

and run the command : class load config.ldi  

ref: https://origin-symwisedownload.symantec.com/resources/webguides/packetguide/11.6/index.htm#Topics/reference/cli/configload.htm?Highlight=local%20host%20class 

 

 

[Chakuttha Riyaphan]

Thank you everyone for your help