Brocade SAN Health Community

Expand all | Collapse all

SAN Health Downloaded Reports

  • 1.  SAN Health Downloaded Reports

    Posted 12-10-2019 09:30 AM

    SAN Health Downloaded Reports:

    After changing to use the newer version of the SANHealth420 collection tool, the performance chart graphs that are generated in the San Health Report, seem to be scaled in the incorrect values in terms of the X axis showing the scale to be Minutes when the collection time was for a 24 hour period.

    Any idea why this is occurring or if there is a way to correct this?

    Regards,
    - Steve



  • 2.  RE: SAN Health Downloaded Reports

    Posted 12-10-2019 01:29 PM

    After an associate of mine did some additional research, they found that the all the performance samples for the graphs are being collected and available in the data behind the graphs, however in the 24 hour collection case just 24 samples are being graphed instead of all 1440 samples that were collected from each switch.

    Using a manual process of selecting the missing samples and modifying the selected data, the graphs in the report can be corrected.

    The automatic process used to generate the graphs in the excel spread sheet or the 420 version of the San Health collection tool should investigated.




  • 3.  RE: SAN Health Downloaded Reports

    Posted 12-11-2019 01:17 AM
    Edited by Michael Sorensen 12-11-2019 01:19 AM
    ​Hi

    We also have some isues with the SAN Health reports, once a week we run a 2 Windows tasks on 2 servers, to get SAN Health from aprox 15 Fabrics, but after upgrading the SAN Health can't run simultaneously, so we have Down graded Again. I will try and run a "new version" and see if we have the same isue as you expirense with the report Graphs.

    /Michael

    ------------------------------
    [IT - SAN & Storage Administrator]
    [JNdata]
    [Denmark]
    ------------------------------