Brocade Fibre Channel Networking Community

Expand all | Collapse all

portHealth: Fabric vision license not present. Please install the license and retry the operation

  • 1.  portHealth: Fabric vision license not present. Please install the license and retry the operation

    Posted 09-04-2017 08:48 PM

    On a san switch which is fabric with other switch. I see porthealth status "Fabric vision license not present. Please install the license and retry the operation" when type portshow

     

    DC-SW24B04:admin> portshow 3
    portIndex: 3
    portName: port3
    portHealth: Fabric vision license not present. Please install the license and retry the operation.

    Authentication: None
    portDisableReason: None
    portCFlags: 0x1
    portFlags: 0x24b03 PRESENT ACTIVE F_PORT G_PORT U_PORT LOGICAL_ONLINE LOGIN NOELP LED ACCEPT FLOGI
    LocalSwcFlags: 0x0
    portType: 18.0
    POD Port: Port is licensed
    portState: 1 Online
    Protocol: FC
    portPhys: 6 In_Sync portScn: 32 F_Port
    port generation number: 648
    state transition count: 39

    portId: 0e0300
    portIfId: 43020011
    portWwn: 20:03:c4:f5:7c:4f:67:cc
    portWwn of device(s) connected:
    10:00:00:90:fa:dc:48:5b
    Distance: normal
    portSpeed: N8Gbps

    Credit Recovery: Inactive
    Aoq: Inactive
    FAA: Inactive
    F_Trunk: Inactive
    LE domain: 0
    Peer beacon: Off
    FC Fastwrite: OFF
    Interrupts: 0 Link_failure: 19 Frjt: 0
    Unknown: 77 Loss_of_sync: 0 Fbsy: 0
    Lli: 239 Loss_of_sig: 20
    Proc_rqrd: 2587 Protocol_err: 0
    Timed_out: 0 Invalid_word: 1349233
    Rx_flushed: 0 Invalid_crc: 0
    Tx_unavail: 0 Delim_err: 0
    Free_buffer: 0 Address_err: 0
    Overrun: 0 Lr_in: 20
    Suspended: 0 Lr_out: 19
    Parity_err: 0 Ols_in: 19
    2_parity_err: 0 Ols_out: 20
    CMI_bus_err: 0

    Port part of other ADs: No


    #FabricVision
    #BrocadeFibreChannelNetworkingCommunity
    #porthealth
    #npiv


  • 2.  Re: portHealth: Fabric vision license not present. Please install the license and retry the operation

    Posted 09-04-2017 11:17 PM

    Hello,

     

    Can you run command below:

    portcfgshow

     

    There is no relationship between the Fabric Vision license and NPIV.


    #BrocadeFibreChannelNetworkingCommunity


  • 3.  Re: portHealth: Fabric vision license not present. Please install the license and retry the operation

    Posted 09-05-2017 03:33 AM
    > Invalid_word: 1349233

    Could you please also post the output of portstatsshow on this port?
    #BrocadeFibreChannelNetworkingCommunity