Brocade Fibre Channel Networking Community

Expand all | Collapse all

SNMP Configuration on DS 220 Switch

  • 1.  SNMP Configuration on DS 220 Switch

    Posted 04-02-2015 06:17 AM

    Hi,

     

    I am using very old DS220B FC Switches with firmware version 6.1.0j & 6.2.2b. I need to configure SNMP traps on these switches. We are using the command snmptraps -send for the same. It is nto sending any traps.

     

    Brocade & EMC are not supporting as this is an EOSL product. I wanted to know if anyone has a way to get this configured and can help me with some pointers or documents, it would be really greatful.

     

    Thanks in anticipation.

     

    Regards,

    Anuj


    #BrocadeFibreChannelNetworkingCommunity


  • 2.  Re: SNMP Configuration on DS 220 Switch

    Posted 04-08-2015 08:07 AM

    Hi,

     

    In order to configure SNMP traps you have to use the following command depending on the SNMP version used:

     

    snmpconfig --set snmpv1

    snmpconfig --set snmpv3

     

     

    Rgds,

    Felipon


    #snmpconfig
    #BrocadeFibreChannelNetworkingCommunity
    #snmp