Spectrum NCM Questions

[Spencer Adams]

I am having issues with NCM not creating a new capture, but just overwriting the existing one.  

[Pankaj Udhas Katigar]

Hi Spencer,

Please provide the following information:

Spectrum release?
Is the problem with one specific device? (if yes, vendor & model of the device)
When did you first notice this problem?
If any error, screenshot?

Thank you.

Regards,
Pankaj Udhas.

[Robert Kettles]

Did the configuration on the device change?

--
This electronic communication and the information and any files transmitted
with it, or attached to it, are confidential and are intended solely for
the use of the individual or entity to whom it is addressed and may contain
information that is confidential, legally privileged, protected by privacy
laws, or otherwise restricted from disclosure to anyone else. If you are
not the intended recipient or the person responsible for delivering the
e-mail to the intended recipient, you are hereby notified that any use,
copying, distributing, dissemination, forwarding, printing, or copying of
this e-mail is strictly prohibited. If you received this e-mail in error,
please return the e-mail to the sender, delete it from your computer, and
destroy any printed copy of it.

[Spencer Adams]

Spectrum Release: 21.2.10.0.248

It is the first test with NCM on Cisco ASA 5515

No error is happening.   

I change the config on the device and try to pull a new config and it just overwrites the original.    The original capture date stays the same but the confirmed date changes.    The changes made to the config are now in the NCM but it never creates a new line or entry for a new config.   

[Raj.A]

Hi Adams,

As per my knowledge, as long as the device configuration is same on the device, it won't change anything under Host Configuration tab of that device. 
It will just update the Last Verified Time.


Regards,
Raj