DX NetOps

Expand all | Collapse all

RPM  Juniper

  • 1.  RPM  Juniper

    Posted 09-26-2017 02:09 PM

    Any one have juniper RPM running and pulling stats in CAPM?



  • 2.  Re: RPM  Juniper

    Posted 09-28-2017 05:02 PM

    Hello Robert,

     

    Hopefully some users respond with real world devices and data they'd be willing to discuss.

     

    Any more details available regarding what you're looking for?

     

    We have a few loaded in our simulation server. I see a few firmware versions on m7i internet router devices, a few SRX 650 devices and an SRX 210.

     

    I also see quite various SRX and M# device models certified for CAPM under the Vendor folder for Juniper.

     

    http://serviceassurance.ca.com/im/

     

    Is there a specific metric or piece of info you're after? I might be able to start up one of the simulations, discover it in a r3.2 lab and get some answers for you.

     

    Thanks,
    Michael



  • 3.  Re: RPM  Juniper

    Posted 09-29-2017 08:47 AM

    I believe there are some 30 mib objects in RPM..  

    I would want o look at all of these for PTX , and MX and EX 4500 series devices.



  • 4.  Re: RPM  Juniper

    Posted 09-29-2017 02:01 PM

    Robert,

     

    Thanks for the input.

     

    I do have a PTX3000, various MX# models, EX4500-40f and EX4550-32f devices in our simulation server.

     

    I see we certified the EX4500 line and these MX model lines:

     

    MX10
    MX240
    MX40
    MX480
    MX5
    MX80
    MX960

     

    It doesn't appear, as of the latest r3.2 cert listings, that the PTX line models have been certified yet.

     

    Are you after specific OIDs and sample values, or specific Metric based report examples of the data polled by CAPM?

     

    Thanks,

    Michael



  • 5.  Re: RPM  Juniper

    Posted 10-02-2017 02:59 PM

    I would want everything this mib covers.

    -- -- Juniper Enterprise Specific MIB: RPM MIB --  -- Copyright (c) 2007, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. --  JUNIPER-RPM-MIB DEFINITIONS ::= BEGIN  IMPORTS     MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32         FROM SNMPv2-SMI              -- RFC2578     DateAndTime, TEXTUAL-CONVENTION         FROM SNMPv2-TC     CounterBasedGauge64         FROM HCNUM-TC     pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex         FROM DISMAN-PING-MIB     jnxRpmMibRoot         FROM JUNIPER-SMI;  jnxRpmMib MODULE-IDENTITY     LAST-UPDATED "200703010000Z" -- March 1 00:00:00 2007 UTC     ORGANIZATION "Juniper Networks, Inc."     CONTACT-INFO             "        Juniper Technical Assistance Center                Juniper Networks, Inc.                1194 N. Mathilda Avenue                Sunnyvale, CA 94089                E-mail: support@juniper.net"      DESCRIPTION             "This mib provides data associated with the Realtime Performance              Monitoring feature."     -- revision history     REVISION "200703010000Z"      DESCRIPTION             "Initial definition."     ::= { jnxRpmMibRoot 1 }   JnxRpmCollectionType ::= TEXTUAL-CONVENTION     STATUS current     DESCRIPTION         "Each RPM entry can maintain several collections of probes and          provide separate calculations over each collection.  The types of          collections include:               currentTest       -- the test currently being executed              lastCompletedTest -- the most recently completed test              movingAverage     -- the 'n' most recent probes (n is configurable)              allTests          -- all the probes (since the entry was last                                   reset).                    Objects with this type identify a specific collection."     SYNTAX INTEGER {                  currentTest       (1),                lastCompletedTest (2),                movingAverage     (3),                allTests          (4)            }   JnxRpmMeasurementType ::= TEXTUAL-CONVENTION     STATUS current     DESCRIPTION         "For each individual probe, several different measurements can be          made.  These include the following (all measurements are provided          in units of microseconds):               roundTripTime -- this is the delay between the the transmission of                   a probe and the arrival of its response.               rttJitter -- this is the difference between the current round trip                   time measurement and the previous one.               rttInterarrivalJitter -- An estimate of the statistical variance                   of a packet's interarrival time.  Defined in rfc1889 as:                     J=J+(|D(i-1,i)|-J)/16                   where J is the interarrival jitter and D(i-1, i) is the current                  round trip jitter measurement.                  egress -- this is the delay beween the transmission of a probe and                  its arrival at its destination.               egressJitter -- this is the difference between the current egress                  delay the previous measurement.               egressInterarrivalJitter -- similar to rttInterarrivalJitter, but                  applied to egress jitter measurements.               ingress -- this is the delay between the transmission of a probe                  response and its arrival at its destination.               ingressJitter -- this is the difference between the current ingress                  delay and the previous measurement.               ingressInterarrivalJitter -- similar to rttInterarrivalJitter, but                  applied to ingress jitter measurements.           Note, not all types of measurements will be performed for every          probe.  The jitter measurements are available only for those RPM           entries that employ hardware timestamps.  Further, the ingress &           egress measurements are available only for those probe types that          measure one-way delays or where hardware timestamps are           employed and the one-way-hardware timestamp knob is enabled.            In either case, the one-way delays must be less than the round          trip times, otherwise they are discarded.           Also note, due to clock synchronization artifacts, many one-way           jitter measurements & calculations may include signifacant variations,          in some cases orders of magnitude greater than the round trip times.          Because of this, one-way jitter measurements will only be performed          on samples which are less than 10 seconds apart."     SYNTAX     INTEGER {                    roundTripTime             (1),                    rttJitter                 (2),                    rttInterarrivalJitter     (3),                    egress                    (4),                    egressJitter              (5),                    egressInterarrivalJitter  (6),                    ingress                   (7),                    ingressJitter             (8),                    ingressInterarrivalJitter (9)                }   JnxRpmMeasurementSet ::= TEXTUAL-CONVENTION     STATUS current     DESCRIPTION         "Over each collection of probes, RPM calculates statistics for several          sets of measurements.  These sets include the following:               roundTripTime    -- the set of round trip delays              posRttJitter     -- the set of positive round trip jitter                                   measurements              negRttJitter     -- the set of negative round trip jitter                                  measurements              egress           -- the set of outgoing (source to destination)                                  one-way delays              posEgressJitter  -- the set of positive egress jitter measurements              negEgressJitter  -- the set of negative egress jitter measurements              ingress          -- the set of incoming (destination to source)                                  one-way delays              posIngressJitter -- the set of positive ingress jitter measurements              negIngressJitter -- the set of negative ingress jitter measurements          Objects with this type identify a specific set of measurements."     SYNTAX INTEGER {                roundTripTime    (1),                posRttJitter     (2),                negRttJitter     (3),                egress           (4),                posEgressJitter  (5),                negEgressJitter  (6),                ingress          (7),                posIngressJitter (8),                negIngressJitter (9)            }   JnxRpmTimestampType ::= TEXTUAL-CONVENTION     STATUS current     DESCRIPTION         "This object identifies the type of timestamp used to obtain a          measurement:           software              this indicates software based timestamps              are used on both client and server.           clientHardware              this indicates hardware based timestamps              are used on the RPM client.  The RPM server              is processed entirely in software.           clientAndServerHardware              this indicates hardware based timestamps              are used on the RPM client and the server."     SYNTAX     INTEGER {                    software                (1),                    clientHardware          (2),                    clientAndServerHardware (3)                }    -- -- Sample Results Table --     jnxRpmResultsSampleTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmResultsSampleEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides measurements from the latest individual RPM               probe samples.  Within each sample, the specific measurement type               is identified by jnxRpmResSampleType.  Note, if the latest              probe was unsuccessful, no measurement types will be available.               See the definition of JnxRpmMeasurementType for details on              the types of measurements available."         ::= { jnxRpmMib 1 }        jnxRpmResultsSampleEntry OBJECT-TYPE         SYNTAX      JnxRpmResultsSampleEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "Each entry provides a specific measurement type for a single              probe."         INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxRpmResSampleType }         ::= { jnxRpmResultsSampleTable 1 }      JnxRpmResultsSampleEntry ::=         SEQUENCE {             jnxRpmResSampleType          JnxRpmMeasurementType,             jnxRpmResSampleValue         Integer32,             jnxRpmResSampleTsType        JnxRpmTimestampType,             jnxRpmResSampleDate          DateAndTime         }      jnxRpmResSampleType OBJECT-TYPE         SYNTAX     JnxRpmMeasurementType        MAX-ACCESS  not-accessible        STATUS      current        DESCRIPTION            "This object identifies the specific measurement type returned             by jnxRpmResSampleValue."        ::= { jnxRpmResultsSampleEntry 1 }      jnxRpmResSampleValue OBJECT-TYPE        SYNTAX     Integer32        MAX-ACCESS read-only        STATUS     current        DESCRIPTION            "This object returns the measurement identified by the corresponding             jnxRpmResSampleType."        ::= { jnxRpmResultsSampleEntry 2 }      jnxRpmResSampleTsType OBJECT-TYPE        SYNTAX     JnxRpmTimestampType        MAX-ACCESS read-only        STATUS     current        DESCRIPTION            "This object identifies the type of timestamp used to obtain this             measurement."        ::= { jnxRpmResultsSampleEntry 3 }      jnxRpmResSampleDate OBJECT-TYPE         SYNTAX     DateAndTime         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the date and time of when this measurement              was obtained."         ::= { jnxRpmResultsSampleEntry 4 }   -- -- Summary Results Table --     jnxRpmResultsSummaryTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmResultsSummaryEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides a summary of the results for a specific              RPM entry (identified by pingCtlOwnerIndex/pingCtlTestName).              The scope of the summary is identified by jnxRpmResSumCollection."         ::= { jnxRpmMib 2 }         jnxRpmResultsSummaryEntry OBJECT-TYPE         SYNTAX      JnxRpmResultsSummaryEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "Each entry in the table provides a summary of the RPM results              over a single collection of probes.  For each RPM entry, there              are several collections maintained: the current test, the              most recently completed test, a configurable number of the most              recent probes (aka 'moving average'), and a global collection              representing all the probes.  Each entry in this table summarizes              the results for one of these collections."         INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxRpmResSumCollection }         ::= { jnxRpmResultsSummaryTable 1 }              JnxRpmResultsSummaryEntry ::=         SEQUENCE {             jnxRpmResSumCollection               JnxRpmCollectionType,             jnxRpmResSumSent                     Unsigned32,             jnxRpmResSumReceived                 Unsigned32,             jnxRpmResSumPercentLost              Unsigned32,             jnxRpmResSumDate                     DateAndTime         }      jnxRpmResSumCollection OBJECT-TYPE         SYNTAX      JnxRpmCollectionType         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This object identifes the collection of probes over which the              summary data represented by the other objects in this table               applies.  Note, if a collection type is not supported or not              configured, it will not be instantiated in this table."         ::= { jnxRpmResultsSummaryEntry 1 }      jnxRpmResSumSent OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the number of probes sent within the               collection identified by jnxRpmResSumCollection."         ::= { jnxRpmResultsSummaryEntry 2 }      jnxRpmResSumReceived OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the number of probes received within the              collection identified by jnxRpmResSumCollection."         ::= { jnxRpmResultsSummaryEntry 3 }      jnxRpmResSumPercentLost OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the percentage of probes lost within the              collection identified by jnxRpmResSumCollection."         ::= { jnxRpmResultsSummaryEntry 4 }      jnxRpmResSumDate OBJECT-TYPE         SYNTAX     DateAndTime         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the date and time of when the most recent              probe within the collection identified by jnxRpmResSumCollection               was completed."         ::= { jnxRpmResultsSummaryEntry 5 }    -- -- Calculated Results Table --     jnxRpmResultsCalculatedTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmResultsCalculatedEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides a set of calculated values for each              RPM entry, for each collection of probes maintained within that              entry, and for each supported measurement set within that               collection of probes.               Note, not all collection types will be available for every              RPM Entry (identified by pingCtlOwnerIndex/pingCtlTestName).              The jitter calculations are available only for those RPM entries               that employ hardware timestamps.  Further, the ingress & egress              calculations are available only for those probe types that              measure one-way delays or where hardware timestamps are               employed and the one-way-hardware timestamp knob is enabled.                In either case, the one-way delays must be less than the round              trip times, otherwise they are discarded.               Also, this table will skip over any measurement set for which              there are 0 samples."         ::= { jnxRpmMib 3 }        jnxRpmResultsCalculatedEntry OBJECT-TYPE         SYNTAX      JnxRpmResultsCalculatedEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             ""         INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxRpmResSumCollection,                 jnxRpmResCalcSet }         ::= { jnxRpmResultsCalculatedTable 1 }      JnxRpmResultsCalculatedEntry ::=         SEQUENCE {             jnxRpmResCalcSet       JnxRpmMeasurementSet,             jnxRpmResCalcSamples   Unsigned32,             jnxRpmResCalcMin       Unsigned32,             jnxRpmResCalcMax       Unsigned32,             jnxRpmResCalcAverage   Unsigned32,             jnxRpmResCalcPkToPk    Unsigned32,             jnxRpmResCalcStdDev    Unsigned32,             jnxRpmResCalcSum       CounterBasedGauge64         }      jnxRpmResCalcSet OBJECT-TYPE         SYNTAX      JnxRpmMeasurementSet         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This object identifies the measurement set upon which the               calculations returned by the other objects in this table are              based."         ::= { jnxRpmResultsCalculatedEntry 1 }      jnxRpmResCalcSamples OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The number of samples used in this calculations."         ::= { jnxRpmResultsCalculatedEntry 2 }      jnxRpmResCalcMin OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The minimum of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmResultsCalculatedEntry 3 }      jnxRpmResCalcMax OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The maximum of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmResultsCalculatedEntry 4 }      jnxRpmResCalcAverage OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The average of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmResultsCalculatedEntry 5 }      jnxRpmResCalcPkToPk OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The difference between the minimum and maximum of all the samples               in the collection and measurement set associated with this row.                Values are provided in units of microseconds."         ::= { jnxRpmResultsCalculatedEntry 6 }      jnxRpmResCalcStdDev OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The standard deviation calculated over all the samples               in the collection and measurement set associated with this row.                Values are provided in units of microseconds."         ::= { jnxRpmResultsCalculatedEntry 7 }      jnxRpmResCalcSum OBJECT-TYPE         SYNTAX     CounterBasedGauge64         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The sum of all the samples in the collection and measurement set               associated with this row.  Values are provided in units of               microseconds."         ::= { jnxRpmResultsCalculatedEntry 8 }   -- -- History Sample Table --     jnxRpmHistorySampleTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmHistorySampleEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides measurements for individual RPM probe samples.              In addition to the last completed sample, a configurable number of              the most recent samples are available as well.  Within each sample,              the specific measurement type is identified by              jnxRpmHistSampleType.  Note, if probe was unsuccessful, no               measurement types will be available for that history entry.               See the definition of JnxRpmMeasurementType for details on              the types of measurements available."         ::= { jnxRpmMib 4 }        jnxRpmHistorySampleEntry OBJECT-TYPE         SYNTAX      JnxRpmHistorySampleEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             ""         INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,                 jnxRpmHistSampleType }         ::= { jnxRpmHistorySampleTable 1 }      JnxRpmHistorySampleEntry ::=         SEQUENCE {             jnxRpmHistSampleType          JnxRpmMeasurementType,             jnxRpmHistSampleValue         Integer32,             jnxRpmHistSampleTsType        JnxRpmTimestampType         }      jnxRpmHistSampleType OBJECT-TYPE         SYNTAX     JnxRpmMeasurementType        MAX-ACCESS  not-accessible        STATUS      current        DESCRIPTION            "This object identifies the specific measurement type returned             by jnxRpmHistSampleValue."        ::= { jnxRpmHistorySampleEntry 1 }      jnxRpmHistSampleValue OBJECT-TYPE        SYNTAX     Integer32        MAX-ACCESS read-only        STATUS     current        DESCRIPTION            "This object returns the measurement identified by the corresponding             jnxRpmHistSampleType."        ::= { jnxRpmHistorySampleEntry 2 }      jnxRpmHistSampleTsType OBJECT-TYPE        SYNTAX     JnxRpmTimestampType        MAX-ACCESS read-only        STATUS     current        DESCRIPTION            "This object identifies the type of timestamp used to obtain this             measurement."        ::= { jnxRpmHistorySampleEntry 3 }        -- -- History Summary Table --     jnxRpmHistorySummaryTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmHistorySummaryEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides historical summary data for each collection              of probes within each RPM Entry, similar to the              jnxRpmResultsSummaryTable.                 In addition to the current summary, this table provides the same               number of historical entries as the jnxRpmHistorySampleTable."         ::= { jnxRpmMib 5 }        jnxRpmHistorySummaryEntry OBJECT-TYPE         SYNTAX      JnxRpmHistorySummaryEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             ""         INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,                 jnxRpmHistSumCollection }         ::= { jnxRpmHistorySummaryTable 1 }      JnxRpmHistorySummaryEntry ::=         SEQUENCE {             jnxRpmHistSumCollection  JnxRpmCollectionType,             jnxRpmHistSumSent        Unsigned32,             jnxRpmHistSumReceived    Unsigned32,             jnxRpmHistSumPercentLost Unsigned32         }      jnxRpmHistSumCollection OBJECT-TYPE         SYNTAX      JnxRpmCollectionType         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "Identifies the collection of probes whose results are summarized by              this row.                 At this time, historical summaries are available only for the               current test (currentTest(1))."         ::= { jnxRpmHistorySummaryEntry 1 }      jnxRpmHistSumSent OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the number of probes sent within the               collection identified by jnxRpmHistSumCollection."         ::= { jnxRpmHistorySummaryEntry 2 }      jnxRpmHistSumReceived OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the number of probes received within the               collection identified by jnxRpmHistSumCollection."         ::= { jnxRpmHistorySummaryEntry 3 }      jnxRpmHistSumPercentLost OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "This object provides the percentage of probes lost within the               collection identified by jnxRpmHistSumCollection."         ::= { jnxRpmHistorySummaryEntry 4 }    -- -- History Calculated Table --     jnxRpmHistoryCalculatedTable OBJECT-TYPE         SYNTAX      SEQUENCE OF JnxRpmHistoryCalculatedEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             "This table provides a set of calculated values for each              RPM entry, for each collection of probes maintained within that              entry, and for each supported calculated type within that               collection of probes, similar to the jnxRpmResultsCalculatedTable.               In addition to the current summary, this table provides the same               number of historical entries as the jnxRpmHistorySampleTable."         ::= { jnxRpmMib 6 }        jnxRpmHistoryCalculatedEntry OBJECT-TYPE         SYNTAX      JnxRpmHistoryCalculatedEntry         MAX-ACCESS  not-accessible         STATUS      current         DESCRIPTION             ""         INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,                 jnxRpmHistSumCollection, jnxRpmHistCalcSet }         ::= { jnxRpmHistoryCalculatedTable 1 }      JnxRpmHistoryCalculatedEntry ::=         SEQUENCE {             jnxRpmHistCalcSet       JnxRpmMeasurementSet,             jnxRpmHistCalcSamples   Unsigned32,             jnxRpmHistCalcMin       Unsigned32,             jnxRpmHistCalcMax       Unsigned32,             jnxRpmHistCalcAverage   Unsigned32,             jnxRpmHistCalcPkToPk    Unsigned32,             jnxRpmHistCalcStdDev    Unsigned32,             jnxRpmHistCalcSum       CounterBasedGauge64         }      jnxRpmHistCalcSet OBJECT-TYPE        SYNTAX     JnxRpmMeasurementSet        MAX-ACCESS  not-accessible        STATUS      current        DESCRIPTION             "This object identifies the measurement set upon which the               calculations returned by the other objects in this table are              based."        ::= { jnxRpmHistoryCalculatedEntry 1 }      jnxRpmHistCalcSamples OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The number of samples used in this calculations."         ::= { jnxRpmHistoryCalculatedEntry 2 }      jnxRpmHistCalcMin OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The minimum of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmHistoryCalculatedEntry 3 }      jnxRpmHistCalcMax OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The maximum of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmHistoryCalculatedEntry 4 }      jnxRpmHistCalcAverage OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The average of all the samples in the collection and measurement              set associated with this row.  Values are provided in units              of microseconds."         ::= { jnxRpmHistoryCalculatedEntry 5 }      jnxRpmHistCalcPkToPk OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The difference between the minimum and maximum of all the samples               in the collection and measurement set associated with this row.                Values are provided in units of microseconds."         ::= { jnxRpmHistoryCalculatedEntry 6 }      jnxRpmHistCalcStdDev OBJECT-TYPE         SYNTAX     Unsigned32         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The standard deviation calculated over all the samples               in the collection and measurement set associated with this row.                Values are provided in units of microseconds."         ::= { jnxRpmHistoryCalculatedEntry 7 }      jnxRpmHistCalcSum OBJECT-TYPE         SYNTAX     CounterBasedGauge64         MAX-ACCESS read-only         STATUS     current         DESCRIPTION             "The sum of all the samples in the collection and measurement set               associated with this row.  Values are provided in units of               microseconds."         ::= { jnxRpmHistoryCalculatedEntry 8 }  END