Hi Keith, these are my CABi notes which fixed things...
cabi.cfg updating memory to:
<startup>
<opt>
java_mem_max = -Xmx6g
java_mem_init = -Xms2g
dump_memory = -XX:+HeapDumpOnOutOfMemoryError
</opt>
</startup>
In the end this is what you needed to set on both the UMP and on the CABI's wasp and cabi probe:
On the UMP Box:
In the wasp.cfg add a "cabi = /D/H/R/P" entry so that UMP can find cabi probe.
wasp.cfg :
<setup>
cabi = /domain/hub/cabi_robot/cabi
On the CABI Box:
While the deployment of cabi is going on, when the wasp probe isn't running open its CFG and add the following line to point it to the data_engine:
wasp.cfg:
<setup>
data_engine = /UIM/HUB001/Pri-Hub-Robot/data_engine
cabi = /UIM/HUB001/robot_name/cabi
When cabi is done installing, afterwards stop it and add the following setting so it knows what the cabi URL is.
cabi.cfg:
<setup>
cabi_url = http://<cabi_hostname>/cabijs
Remember then do a full stop on your UMP's wasp probe. Just stop Nimsoft then start it and do the same on the CABI box once all the above is configured.
------------------------------
Daniel Blanco
Enterprise Tools Team Architect
DBlanco@alphaserveit.com------------------------------
Original Message:
Sent: 01-31-2020 02:37 PM
From: Keith Clay
Subject: CABI error message after update to 4.10
This is all I get. I was getting this before adding the cabi=
Original Message:
Sent: 01-31-2020 02:05 PM
From: David MICHEL
Subject: CABI error message after update to 4.10
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=108845
------------------------------
Support Engineer
Broadcom
Original Message:
Sent: 01-31-2020 01:39 PM
From: Keith Clay
Subject: CABI error message after update to 4.10
Where do I add cabi =?
Original Message:
Sent: 01-31-2020 01:23 PM
From: David MICHEL
Subject: CABI error message after update to 4.10
Accepting that the cabi deployment did complete correctly and the sync users message was in the log
adding the raw configure cabi = path may help, that's the path as displayed in IM console for cabi probe.
sometimes it helps to deactivate cabi and wasp at cabi and ump robots, then activate each in turn after getting pid and port
even if not resolving there could be more meaningful messages in the log.
try going to the cabi server direct to see if that loads, it it doesn't clean redeploy of cabi may be needed.
Tech Tip: How to remove and reinstall cabi bundled probe v4.10 on UIM 9.2.0
https://community.broadcom.com/enterprisesoftware/communities/community-home/digestviewer/viewthread?GroupId=1315&MessageKey=5ef87bdd-1962-4bd6-8ca3-a8cc6168b253&CommunityKey=170eb4e5-a593-4af2-ad1d-f7655e31513b&tab=digestviewer&ReturnUrl=%2fenterprisesoftware%2fcommunities%2fcommunity-home%2fdigestviewer%3fcommunitykey%3d170eb4e5-a593-4af2-ad1d-f7655e31513b%26tab%3ddigestviewer
------------------------------
Support Engineer
Broadcom
Original Message:
Sent: 01-31-2020 12:51 PM
From: Keith Clay
Subject: CABI error message after update to 4.10
I am finding this in the wasp.log on the cabi server. CABI summary report is still just spinning and never retrieves the dashboard.
Jan 31 12:44:41:477 ERROR [http-nio-80-exec-5, org.apache.catalina.core.ContainerBase.[wasp-engine].[localhost].[/cabijs].[jasperserver]] invoke() Servlet.service() for servlet [jasperserver] in context with path [/cabijs] threw exception [javax.servlet.ServletException: java.lang.IllegalStateException: Cannot create a session after the response has been committed] with root cause
Jan 31 12:44:41:477 ERROR [http-nio-80-exec-5, org.apache.catalina.core.ContainerBase.[wasp-engine].[localhost].[/cabijs].[jasperserver]] java.lang.IllegalStateException: Cannot create a session after the response has been committed