If this is a relatively new installation. I would suggest just doing it clean at least for the primary hub, database and ump.
There are some KB on moving a primary hub installation from one server to another so you could look at that.
But this has to do with copying files and re-running the installer.
Not sure how this would work out for just changing the IP.
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 06-05-2020 03:30 PM
From: Jose Gutierrez
Subject: How to change IPs adress of UIM solution
Hi Gene,
Thanks for the answer.
From your point of view its better not move anything? Are you agree?
Regards
Jose
Original Message:
Sent: 6/5/2020 3:21:00 PM
From: Gene Howard
Subject: RE: How to change IPs adress of UIM solution
you will need to update all of the robot.cfg, hub.cfg files on each machine
change the data_engine.cfg to point to the new database.
this will reset your security.cfg file so it will need to be recreated or restored from backup.
We do not have have a KB on switching out IP addresses for UIM that I know of.
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
Original Message:
Sent: 06-05-2020 03:02 PM
From: Jose Gutierrez
Subject: How to change IPs adress of UIM solution
Hi guys,
I installed UIM version 8.5.1 on Windows platform. I have Database server, UIM portal server, primary HUB , 2 secondary HUBS. I implemented using IPs Address like 172.27.207.X segment but now my client wants to move to another subnet the entire solution.
My questions are:
1- ¿We can change IP Address in each server without affect the funcionality of the application?
2- If we can change the IP Address ¿what are the steps in order to not affect the funcionality?
I hope you can help me.
Regards
Jose