DX Infrastructure Manager

Expand all | Collapse all

loglevel and logsize change

Jump to Best Answer
  • 1.  loglevel and logsize change

    Posted 3 days ago
    hi

    i wanted to make a mass change in loglevel and logsize of allthe probes in all the server is there a way to do it in a go and avoid all the physical work behind it .

    regards
    nijin


  • 2.  RE: loglevel and logsize change

    Posted 3 days ago
    You would need to make an update package for each probe as the location of the loglevel and size could be in different sections based on the probe.

    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------



  • 3.  RE: loglevel and logsize change

    Posted 3 days ago
    Do you use MCS? If so the "setup {probe}" package or choice in MCS will have loglevel setting and most also have logsize setting. SO you can modify the MCS "setup {probe name}" in MCS where you would want to probe deployed. This could efficiently deploy to all your robots|probes.


  • 4.  RE: loglevel and logsize change

    Posted 3 days ago
    You can create a cfg file push to all robots , there is any specific reason behind this ? Because unnecessary the log will increase


  • 5.  RE: loglevel and logsize change

    Posted 3 days ago
    Gene

    can i edit in the robot_update package i have in my environment so that at least controller controller hdb  and spooler can be updated simultaneously instead

    the reason for increasing the log level and logsize is because basically tool missed a dirscan alarm for which i could replicate to troubleshoot hence it is a request from client to keep them at least at 3


  • 6.  RE: loglevel and logsize change

    Posted 3 days ago

    I would make a copy of it in the achieve and rename it.
    Then modify it as needed.



    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------



  • 7.  RE: loglevel and logsize change

    Posted 3 days ago
    i am doing it but still not able to find where to modify for log level there is no editable cfx present and if i add modified cfx to respective OS it still does not work
    can you suggest

    resgards
    nijin


  • 8.  RE: loglevel and logsize change
    Best Answer

    Posted 3 days ago

    So I have never tested doing this.
    But thinking about this the robot_update does not make any changes to the robot.cfg as it is designed to update binaries only.
    so that is really not surprising that it does not have one.
    You will need to create your own package to do this.



    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------