updating IDM datasource in vAPP

[Charly Setbon]

Hello all.

My customer needs to update the connection pool to IDM, say the max connection to 100.

the following link explains how to create and delete connection pools.

I assume this is the way to go?

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/layer7-identity-and-access-management/identity-portal/14-0/configuring/configuring-ca-identity-suite-virtual-appliance.html

If someone can share such an example (XML input files + commands to run), that would be nice to validate.

thanks!

------------------------------
Senior Consultant/Architect- CA Identity Suite SME
Topspin Technologies (Partner)
------------------------------

[Tomo Fujita]

This KB article might be helpful for you.

Article title: IdentityManager performance considerations and settings

https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=46523

[Charly Setbon]

Hi Tomo-

Thanks for your answer.
I was mostly asking how to just replace a value say  from <max-pool-size>20</max-pool-size>  to <max-pool-size>200</max-pool-size>
on an existing and deployed datasource.

As you know the standalone.xml is (unfortunately) read only, no access.

The link i send above, only partially explains how to do it, but no real example on the file to be created.

see below:
https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/layer7-identity-and-access-management/identity-portal/14-0/configuring/configuring-ca-identity-suite-virtual-appliance.html





------------------------------
Senior Consultant/Architect- CA Identity Suite SME
Topspin Technologies (Partner)
------------------------------

[Tomo Fujita]

When I look at my vApp 14.3 deployment, <max-pool-size> is set to 1000 in the datasources section.

:/opt/CA/wildfly-idm/standalone/configuration > grep max-pool-size ca-standalone-full-ha.xml
                <max-pool-size>1000</max-pool-size> </pool>
                <max-pool-size>1000</max-pool-size> </pool>
                <max-pool-size>1000</max-pool-size> </pool>
                <max-pool-size>1000</max-pool-size> </pool>
                <max-pool-size>1000</max-pool-size> </pool>
                <max-pool-size>1000</max-pool-size> </pool>

If you are using vApp 14.0, I recommend upgrading to 14.3, as 14.0 just became EOS last month.
https://techdocs.broadcom.com/us/product-content/status/announcement-documents/2017/ca-identity-suite-14-x-end-of-service-announcement.html