DX Infrastructure Management

Expand all | Collapse all

Admin Status and Oper Status to reflect actual interface status in UMP

  • 1.  Admin Status and Oper Status to reflect actual interface status in UMP

    Posted 08-21-2019 11:03 AM
      |   view attached
    Hi community,

    Is there a way that anyone knows of to have the USM in UMP show the actual status of the fields Admin Status and Oper Status in the Interface tab of a device, and not just the discovered status?

    Like if an alarm event is raised that the OPERSTATUS has changed from 1 to !=1 then have that reflected in this table? ( attached image)


  • 2.  RE: Admin Status and Oper Status to reflect actual interface status in UMP

    Posted 08-21-2019 04:38 PM
    As you mention that table is not real time and you can post an Idea to request it. 
    Not sure where that is coming from, if it is discovery or from a monitoring probe.

    ------------------------------
    Support Engineer
    Broadcom
    ------------------------------



  • 3.  RE: Admin Status and Oper Status to reflect actual interface status in UMP

    Posted 08-22-2019 05:55 AM
    Thanks David,

    I will do so.


  • 4.  RE: Admin Status and Oper Status to reflect actual interface status in UMP

    Posted 6 days ago
    I have posted the idea at https://community.broadcom.com/participate/ideation-home/viewidea?IdeationKey=3df6ac48-2b1b-4caa-b7fb-2ccd64bc938b

    ------------------------------
    Application Developer
    Dimension Data
    ------------------------------