DX Infrastructure Manager

Expand all | Collapse all

HA setup for Primary

Jump to Best Answer
  • 1.  HA setup for Primary

    Posted 01-17-2020 02:07 PM
    For setting up failover for the primary hub using HA probe, do most people setup up all the same probes on the HA hub as the primary hub?  If not, what subset are setup?

  • 2.  RE: HA setup for Primary

    Posted 01-17-2020 04:45 PM
    First support does not recommend any remote probes such as sqlserver or rsp be run on the primary only local monitoring probes such as CDM.
    But yes all probes are recommended to be replicated to the HA hub for the primary failover.
    have you reviewed the HA setup guide?

    Gene Howard
    Principal Support Engineer

  • 3.  RE: HA setup for Primary

    Posted 01-17-2020 05:23 PM
    Edited by Keith Clay 01-17-2020 05:35 PM
    We've tried using the techdocs documentation for doing this and it sucks.

    I just looked at the doc in the zip you sent and it's much different than what's online.

  • 4.  RE: HA setup for Primary

    Posted 01-18-2020 04:10 AM
    This is a newer version tested with uim 9.20: https://community.broadcom.com/enterprisesoftware/communities/community-home/digestviewer/viewthread?GroupId=1315&MessageKey=f28d1578-1ac9-45db-903d-b46ccbd5041c

  • 5.  RE: HA setup for Primary
    Best Answer

    Posted 01-18-2020 12:40 PM
      |   view attached
    Hi Keith,

    Here is the latest version of the HA doc which includes what is 'officially' supported and some notes on what is not, e.g., UMP failover. That said, I have tested the field-developed UMP failover along with HA failover up to v9.20 (but not 9.20S), and all works as expected. So if you have any questions about the AIOps - DX Infrastructure Manager - High Availability (HA) setup guide.pdf   or process let me know. Luc also maintains his own separate version.


    Support Engineer