Hi,
Yesterday we upgraded AutoSys to 11.3.6 SP8 and WCC to 11.4.7 and since then when we want to validate AutoSys servers in WCC (configuration tab) we get following messages:
Error: E190222 The CSAM is not configured properly for the ports 9010, 49152. You may need to configure it manually from the command line as privileged user.
Confirmation: I190104 NPE_Autosys - The server was validated successfully.
So the autoSys servers are validated but it seems there is some kind of misconfiguration at CSAM level.
CSAM seems to be properly configured:
On AutoSys servers
./csamconfigedit port 9010 display
EnableSSL=False
PmuxServerPort=7163
EnablePmux=False
./csamconfigedit portrange=49152-50176 display ./csamconfigedit portrange=49152-50176 display
EnableSSL=True
EnablePmux=True
In WCC we have same values
./csamconfigedit port 9010 display
EnableSSL=False
PmuxServerPort=7163
EnablePmux=False
./csamconfigedit portrange=49152-50176 display ./csamconfigedit portrange=49152-50176 display
EnableSSL=True
EnablePmux=True
I cannot see any error on CSAM log and all seems to be working fine but I am not sure why we have this error in configuration tab.
Any of you have an idea what can be misconfigured and how to fix it?
thanks
José