Hello Team,
I also have a question on this, I am on 12.8.04. Following the instructions on first policy server per our doc:
XPS
#7
Change the value to L (local)
Q to enable
Then back to
#8 to set schedule
C Change to Sun@07:00
Qs to enable.
I also checked XPS.cfg file, autosweep=true.
Now my question
**************************
1> On my second policy server, I went to the XPSConfig to check:
#7 Autosweep is not enable yet
#8 The pending value now is the same as my first policy server that I set at Sun@07:00
---> I am wondering why? since the first policy sever enabled with L (local).
2> After I enabled it on the second server, and given a different time. Now back to the first server, the time changed to match the second server.
I want two servers run in a different time. Why is this happening?
Thanks for your help,
June
Original Message:
Sent: 07-13-2018 02:56 PM
From: TERRY MILLS
Subject: Re: Autosweep configured but not running 12.8
Have you disabled Autosweep globally using XPSConfig tool ?
XPSSweeper Auto Schedule not generating XPSSweeper - CA Knowledge
Looks like you enabled it locally on only one Policy server by modifying the XPS.CFG file at below location:
7-Autosweep, Current Value:"TRUE".