Rally Software

 View Only
  • 1.  Filtered Swimlanes on Custom Board

    Posted Aug 02, 2019 11:40 AM
    I have a custom board with swimlanes based on a custom field. I would like to filter the board to only show one or a few of the swimlanes and their cards. Does anyone have any suggestions on how to accomplish this?

    ------------------------------
    Agile Coach
    Boston, MA
    ------------------------------


  • 2.  RE: Filtered Swimlanes on Custom Board
    Best Answer

    Posted Aug 02, 2019 06:18 PM
    Hi Stephen;

    Your only option here (aside from custom app development) would be to collapse the irrelevant swimlanes. I've not tested to see whether collapsed and expanded swimlanes can be part of a saved view but that's pretty much your only option. Hope that helps.



  • 3.  RE: Filtered Swimlanes on Custom Board

    Posted Aug 06, 2019 01:40 PM
    Hi Eric,

    I tested Saved View and found that collapsed and expanded​ swimlanes are not saved.

    Thanks

    ------------------------------
    Agile Coach
    Boston, MA
    ------------------------------



  • 4.  RE: Filtered Swimlanes on Custom Board

    Posted Aug 07, 2019 12:27 PM
    Hi Stephen,

    Use the advanced filters and set the filter to the swim lane you want. The board still shows all the swim lanes but the cards are displayed only for the one you have selected in the filter(s). 

    When using multiple advanced filters, use OR condition to display all results.

    Thanks,
    Ayush